What is the low beam headlight bulb size for a 1968 Ford Mustang?

The 1968 Ford Mustang uses a H6024 LED bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 1968 Ford Mustang?

The high beam bulb size for the 1968 Ford Mustang is H6024 LED.

Why are my 1968 Ford Mustang headlights dim?

Dim headlights on a 1968 Ford Mustang can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a H6024 LED LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 1968 Ford Mustang fog light?

The 1968 Ford Mustang uses a LED Fog Light bulb for the fog light position.

Is the 1968 Ford Mustang single or dual beam?

The 1968 Ford Mustang uses a single bulb (dual filament) headlight system. This means one bulb controls both high and low beams.

Can I install LED bulbs on my 1968 Ford Mustang?

Yes, the 1968 Ford Mustang comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a H6024 LED LED conversion kit for the low beams.

Does the 1968 Ford Mustang have fog lights?

Yes, the 1968 Ford Mustang takes a LED Fog Light bulb for the fog light position.

Did the 1968 Ford Mustang change headlight bulb sizes from the previous year?

No — the 1968 Ford Mustang uses the same bulb sizes as the 1967 model. This configuration has been consistent across the 1964–1968 generation.

Is the 1968 Ford Mustang the first or last year to use H6024 LED bulbs?

The 1968 Ford Mustang is the last year in the 1964–1968 generation to use the H6024 LED bulb for the low beam headlight.

How do I change the headlight on a 1968 Ford Mustang?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old H6024 LED bulb counter-clockwise to remove it, then insert the new bulb and reassemble. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 1968 Ford Mustang?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved H6024 LED LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 1968 Ford Mustang headlights?

A pair of halogen H6024 LED bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 1968 Ford Mustang?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the H6024 LED position are available as direct plug-and-play replacements.

The 1968 Ford Mustang is the last model year to use this bulb configuration (1964–1968).

Fitment Guaranteed for 1968 Ford Mustang

What Size Bulbs Does a 1968 Ford Mustang Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 1968 Ford Mustang Have?

Lighting on the 1968 Ford Mustang is managed by a total of 13 bulbs, covering everything from primary headlights to signal indicators. It features an extensive lighting system powered by a halogen-based setup where a single H6024 LED dual-filament bulb handles both low and high beam duties within the same reflector. This model belongs to the early years of the Mustang's 1964-2022 production span.

Can You Put LED Bulbs in a 1968 Ford Mustang?

For a Ford built for the road and trail, LED upgrades provide the high-contrast lighting needed for better obstacle detection. Since your Mustang uses a single H6024 LED bulb for both high and low beams, ensure your chosen LED kit is "dual-beam" compatible. This allows the LED circuitry to mimic the two-filament design of the original halogen bulb. Don't forget the LED Fog Light fog lights; switching these to LED can dramatically improve your visibility in adverse weather.

1968 Ford Mustang Bulb Size Chart

Position	Bulb Size	Shop
Low Beam	H6024 LED	Buy H6024 LED →
High Beam	H6024 LED	Buy H6024 LED →
Fog Light	LED Fog Light	Buy LED Fog Light →
Brake Light	High Mount Brake Light	Buy High Mount Brake Light →
Dome Light	1003	Buy 1003 →
Turn Signal Front	1157	Buy 1157 →
License Plate	97	Buy 97 →
Parking Light	1157	Buy 1157 →
Side Marker	194	Buy 194 →
Turn Signal Rear	1157	Buy 1157 →
Reverse Light	1142	Buy 1142 →
Trunk Light	631	Buy 631 →
Tail Light	1157	Buy 1157 →

How do the 1968 Ford Mustang's bulbs compare to other years?

The 1968 Ford Mustang uses the same bulbs as the 1967 model.

The 1969 model switched to a different bulb configuration.

This bulb configuration covers the 1964–1968 model years. ← 1967 1969 →

Finding the best installation guide...

Other Mustang Years

Other Vehicles That Use H6024 LED Bulbs

2006 Jeep TJ 2006 Jeep Wrangler 1997 Land Rover Defender 90 1997 Mazda MX-5 Miata 1996 Mazda Miata 1995 Suzuki Samurai