What is the low beam headlight bulb size for a 2012 Ford F-150?

The 2012 Ford F-150 uses a H13 LED bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 2012 Ford F-150?

The high beam bulb size for the 2012 Ford F-150 is H13 LED.

Why are my 2012 Ford F-150 headlights dim?

Dim headlights on a 2012 Ford F-150 can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a H13 LED LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 2012 Ford F-150 fog light?

The 2012 Ford F-150 uses a 9140 LED bulb for the fog light position.

Is the 2012 Ford F-150 single or dual beam?

The 2012 Ford F-150 uses a single bulb (dual filament) headlight system. This means one bulb controls both high and low beams.

Can I install LED bulbs on my 2012 Ford F-150?

Yes, the 2012 Ford F-150 comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a H13 LED LED conversion kit for the low beams.

Does the 2012 Ford F-150 have fog lights?

Yes, the 2012 Ford F-150 takes a 9140 LED bulb for the fog light position.

Did the 2012 Ford F-150 change headlight bulb sizes from the previous year?

No — the 2012 Ford F-150 uses the same bulb sizes as the 2011 model. This configuration has been consistent across the 2011–2012 generation.

Is the 2012 Ford F-150 the first or last year to use H13 LED bulbs?

The 2012 Ford F-150 is the last year in the 2011–2012 generation to use the H13 LED bulb for the low beam headlight.

How do I change the headlight on a 2012 Ford F-150?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old H13 LED bulb counter-clockwise to remove it, then insert the new bulb and reassemble. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 2012 Ford F-150?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved H13 LED LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 2012 Ford F-150 headlights?

A pair of halogen H13 LED bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 2012 Ford F-150?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the H13 LED position are available as direct plug-and-play replacements.

The 2012 Ford F-150 is the last model year to use this bulb configuration (2011–2012).

Fitment Guaranteed for 2012 Ford F-150

What Size Bulbs Does a 2012 Ford F-150 Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 2012 Ford F-150 Have?

Owners of the 2012 Ford F-150 will find a total of 14 lighting elements throughout the vehicle's exterior. It features an extensive lighting system powered by a halogen-based setup where a single H13 LED dual-filament bulb handles both low and high beam duties within the same reflector. This model belongs to the late years of the F-150's 1975-2022 production span.

Can You Put LED Bulbs in a 2012 Ford F-150?

For a Ford built for the road and trail, LED upgrades provide the high-contrast lighting needed for better obstacle detection. Since your F-150 uses a single H13 LED bulb for both high and low beams, ensure your chosen LED kit is "dual-beam" compatible. This allows the LED circuitry to mimic the two-filament design of the original halogen bulb. Don't forget the 9140 LED fog lights; switching these to LED can dramatically improve your visibility in adverse weather.

2012 Ford F-150 Bulb Size Chart

Position	Bulb Size	Shop
Low Beam	H13 LED	Buy H13 LED →
High Beam	H13 LED	Buy H13 LED →
Fog Light	9140 LED	Buy 9140 LED →
Brake Light	912 LED	Buy 912 LED →
Side Marker	4057K LED	Buy 4057K LED →
Turn Signal Front	3157NA LED	Buy 3157NA LED →
Turn Signal Rear	4057K LED	Buy 4057K LED →
Dome Light	578	Buy 578 →
Map Light	194	Buy 194 →
Parking Light	3157NA	Buy 3157NA →
Reverse Light	912	Buy 912 →
Trunk Light	912	Buy 912 →
Tail Light	3157CK	Buy 3157CK →
License Plate	194	Buy 194 →

How do the 2012 Ford F-150's bulbs compare to other years?

The 2012 Ford F-150 uses the same bulbs as the 2011 model.

The 2013 model switched to a different bulb configuration.

This bulb configuration covers the 2011–2012 model years. ← 2011 2013 →

Finding the best installation guide...

Other F-150 Years

2022 2021 2020 2019 2018 2017 2016 2015 2014 2013 2011 2010 2009 2008 2007 2006 2005 2004 2003 2002 2001 2000 1999 1998 1997 1996 1995 1994 1993 1992 1991 1990 1989 1988 1987 1986 1985 1983 1982 1981 1980 1979 1978 1977 1976 1975

Other Vehicles That Use H13 LED Bulbs

2019 Jeep Renegade 2019 Jeep Wrangler 2019 Nissan NV1500 2019 Nissan NV200 2019 Nissan NV2500 2019 Nissan NV3500