What is the low beam headlight bulb size for a 2000 Ford Expedition?

The 2000 Ford Expedition uses a 9007 LED bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 2000 Ford Expedition?

The high beam bulb size for the 2000 Ford Expedition is 9007 LED.

Why are my 2000 Ford Expedition headlights dim?

Dim headlights on a 2000 Ford Expedition can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a 9007 LED LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 2000 Ford Expedition fog light?

The 2000 Ford Expedition uses a 9145 LED bulb for the fog light position.

Is the 2000 Ford Expedition single or dual beam?

The 2000 Ford Expedition uses a single bulb (dual filament) headlight system. This means one bulb controls both high and low beams.

Can I install LED bulbs on my 2000 Ford Expedition?

Yes, the 2000 Ford Expedition comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a 9007 LED LED conversion kit for the low beams.

Does the 2000 Ford Expedition have fog lights?

Yes, the 2000 Ford Expedition takes a 9145 LED bulb for the fog light position.

Did the 2000 Ford Expedition change headlight bulb sizes from the previous year?

No — the 2000 Ford Expedition uses the same bulb sizes as the 1999 model. This configuration has been consistent across the 1999–2001 generation.

How do I change the headlight on a 2000 Ford Expedition?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old 9007 LED bulb counter-clockwise to remove it, then insert the new bulb and reassemble. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 2000 Ford Expedition?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved 9007 LED LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 2000 Ford Expedition headlights?

A pair of halogen 9007 LED bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 2000 Ford Expedition?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the 9007 LED position are available as direct plug-and-play replacements.

The 2000 Ford Expedition shares its bulb sizes with the 1999–2001 generation.

Fitment Guaranteed for 2000 Ford Expedition

What Size Bulbs Does a 2000 Ford Expedition Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 2000 Ford Expedition Have?

The 2000 Ford Expedition utilizes a refined lighting configuration featuring 14 distinct bulb positions. It features an extensive lighting system powered by a halogen-based setup where a single 9007 LED dual-filament bulb handles both low and high beam duties within the same reflector. This model belongs to the early years of the Expedition's 1997-2022 production span.

Can You Put LED Bulbs in a 2000 Ford Expedition?

For a Ford built for the road and trail, LED upgrades provide the high-contrast lighting needed for better obstacle detection. Since your Expedition uses a single 9007 LED bulb for both high and low beams, ensure your chosen LED kit is "dual-beam" compatible. This allows the LED circuitry to mimic the two-filament design of the original halogen bulb. Don't forget the 9145 LED fog lights; switching these to LED can dramatically improve your visibility in adverse weather.

2000 Ford Expedition Bulb Size Chart

Position	Bulb Size	Shop
Low Beam	9007 LED	Buy 9007 LED →
High Beam	9007 LED	Buy 9007 LED →
Fog Light	9145 LED	Buy 9145 LED →
Brake Light	194	Buy 194 →
Side Marker	194NA LED	Buy 194NA LED →
Turn Signal Front	3157NA LED	Buy 3157NA LED →
Turn Signal Rear	3157K LED	Buy 3157K LED →
Reverse Light	3156K	Buy 3156K →
Dome Light	578	Buy 578 →
License Plate	194	Buy 194 →
Map Light	PC579	Buy PC579 →
Parking Light	3157NA	Buy 3157NA →
Trunk Light	578	Buy 578 →
Tail Light	3157	Buy 3157 →

How do the 2000 Ford Expedition's bulbs compare to other years?

The 2000 Ford Expedition uses the same bulbs as the 1999 model.

The 2001 model continues with the same bulb sizes.

This bulb configuration covers the 1999–2001 model years. ← 1999 2001 →

Finding the best installation guide...

Other Expedition Years

2022 2021 2020 2019 2018 2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 2002 2001 1999 1998 1997

Other Vehicles That Use 9007 LED Bulbs

2019 Mitsubishi Mirage G4 2019 Nissan Frontier 2019 Nissan Versa Note 2015 Nissan Xterra 2014 Nissan Juke 2012 Mitsubishi Galant