What is the low beam headlight bulb size for a 1976 Ford Bronco?

The 1976 Ford Bronco uses a 6014 LED bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 1976 Ford Bronco?

The high beam bulb size for the 1976 Ford Bronco is 6014 LED.

Why are my 1976 Ford Bronco headlights dim?

Dim headlights on a 1976 Ford Bronco can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a 6014 LED LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 1976 Ford Bronco fog light?

The 1976 Ford Bronco uses a LED Fog Light bulb for the fog light position.

Is the 1976 Ford Bronco single or dual beam?

The 1976 Ford Bronco uses a single bulb (dual filament) headlight system. This means one bulb controls both high and low beams.

Can I install LED bulbs on my 1976 Ford Bronco?

Yes, the 1976 Ford Bronco comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a 6014 LED LED conversion kit for the low beams.

Does the 1976 Ford Bronco have fog lights?

Yes, the 1976 Ford Bronco takes a LED Fog Light bulb for the fog light position.

Did the 1976 Ford Bronco change headlight bulb sizes from the previous year?

No — the 1976 Ford Bronco uses the same bulb sizes as the 1975 model. This configuration has been consistent across the 1975–1977 generation.

How do I change the headlight on a 1976 Ford Bronco?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old 6014 LED bulb counter-clockwise to remove it, then insert the new bulb and reassemble. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 1976 Ford Bronco?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved 6014 LED LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 1976 Ford Bronco headlights?

A pair of halogen 6014 LED bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 1976 Ford Bronco?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the 6014 LED position are available as direct plug-and-play replacements.

The 1976 Ford Bronco shares its bulb sizes with the 1975–1977 generation.

Fitment Guaranteed for 1976 Ford Bronco

What Size Bulbs Does a 1976 Ford Bronco Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 1976 Ford Bronco Have?

Owners of the 1976 Ford Bronco will find a total of 11 lighting elements throughout the vehicle's exterior. It features an extensive lighting system powered by a halogen-based setup where a single 6014 LED dual-filament bulb handles both low and high beam duties within the same reflector. This model belongs to the mid years of the Bronco's 1966-1996 production span.

Can You Put LED Bulbs in a 1976 Ford Bronco?

For a Ford built for the road and trail, LED upgrades provide the high-contrast lighting needed for better obstacle detection. Since your Bronco uses a single 6014 LED bulb for both high and low beams, ensure your chosen LED kit is "dual-beam" compatible. This allows the LED circuitry to mimic the two-filament design of the original halogen bulb. Don't forget the LED Fog Light fog lights; switching these to LED can dramatically improve your visibility in adverse weather.

1976 Ford Bronco Bulb Size Chart

Position	Bulb Size	Shop
Low Beam	6014 LED	Buy 6014 LED →
High Beam	6014 LED	Buy 6014 LED →
Fog Light	LED Fog Light	Buy LED Fog Light →
Brake Light	Brake Light Assembly	Buy Brake Light Assembly →
Side Marker	194 LED	Buy 194 LED →
Turn Signal Front	198 LED	Buy 198 LED →
Turn Signal Rear	198 LED	Buy 198 LED →
Reverse Light	199	Buy 199 →
License Plate	1178 or 194	Buy 1178 or 194 →
Parking Light	198	Buy 198 →
Trunk Light	LED Light	Buy LED Light →

How do the 1976 Ford Bronco's bulbs compare to other years?

The 1976 Ford Bronco uses the same bulbs as the 1975 model.

The 1977 model continues with the same bulb sizes.

This bulb configuration covers the 1975–1977 model years. ← 1975 1977 →

Finding the best installation guide...

Other Bronco Years

1996 1995 1994 1993 1992 1991 1990 1989 1988 1987 1986 1985 1984 1983 1982 1981 1980 1979 1978 1977 1975 1974 1973 1972 1971 1970 1969 1968 1967 1966

Other Vehicles That Use 6014 LED Bulbs

1992 Mazda Miata 1987 Toyota Land Cruiser 1986 Isuzu Trooper 1985 Mazda RX7 1980 Toyota Cressida 1980 Volkswagen Super Beetle