What is the low beam headlight bulb size for a 1989 Ford Bronco II?

The 1989 Ford Bronco II uses a 9004 bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 1989 Ford Bronco II?

The high beam bulb size for the 1989 Ford Bronco II is 194.

Why are my 1989 Ford Bronco II headlights dim?

Dim headlights on a 1989 Ford Bronco II can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a 9004 LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 1989 Ford Bronco II fog light?

The 1989 Ford Bronco II typically does not come with factory fog lights in all trim levels. If your vehicle is equipped with them, check the manual as sizes can vary by trim.

Is the 1989 Ford Bronco II single or dual beam?

The 1989 Ford Bronco II uses a dual bulb headlight system. This means you have separate bulbs for high and low beams.

Can I install LED bulbs on my 1989 Ford Bronco II?

Yes, the 1989 Ford Bronco II comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a 9004 LED conversion kit for the low beams.

Did the 1989 Ford Bronco II change headlight bulb sizes from the previous year?

Yes — the 1989 Ford Bronco II uses different bulb sizes than the 1988 model. The 1989 generation introduced this bulb configuration.

Is the 1989 Ford Bronco II the first or last year to use 9004 bulbs?

The 1989 Ford Bronco II is the only year in the 1989 generation to use the 9004 bulb for the low beam headlight.

How do I change the headlight on a 1989 Ford Bronco II?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old 9004 bulb counter-clockwise to remove it, then insert the new bulb and reassemble. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 1989 Ford Bronco II?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved 9004 LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 1989 Ford Bronco II headlights?

A pair of halogen 9004 bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 1989 Ford Bronco II?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the 9004 position are available as direct plug-and-play replacements.

The 1989 Ford Bronco II has a unique bulb configuration not shared with adjacent model years.

Fitment Guaranteed for 1989 Ford Bronco II

What Size Bulbs Does a 1989 Ford Bronco II Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 1989 Ford Bronco II Have?

When it comes to nighttime visibility, the 1989 Ford Bronco II relies on an arrangement of 10 specialized bulbs. It features a comprehensive lighting system powered by a dual-bulb halogen configuration using separate 9004 low beam and 194 high beam bulbs for precise light distribution.

Can You Put LED Bulbs in a 1989 Ford Bronco II?

For a Ford built for the road and trail, LED upgrades provide the high-contrast lighting needed for better obstacle detection. We recommend starting your upgrade with the 9004 low beams, as they see the most use. Adding a matching 194 LED kit later will complete the look and ensure consistent lighting performance.

1989 Ford Bronco II Bulb Size Chart

Position	Bulb Size	Shop
Turn Signal Front	3157CK	Buy 3157CK →
Side Marker	194	Buy 194 →
Low Beam	9004	Buy 9004 →
Tail Light	1157	Buy 1157 →
Parking Light	3157CK	Buy 3157CK →
Reverse Light	3156	Buy 3156 →
License Plate	194	Buy 194 →
Brake Light	1157	Buy 1157 →
Turn Signal Rear	1157	Buy 1157 →
High Beam	194	Buy 194 →

How do the 1989 Ford Bronco II's bulbs compare to other years?

The 1989 Ford Bronco II changed bulb sizes from 1988. The previous model year used a different configuration.

The 1990 model switched to a different bulb configuration.

This bulb configuration covers the 1989 model years. ← 1988 1990 →

Finding the best installation guide...

Other Bronco II Years

1990 1988 1987 1986 1985 1984

Other Vehicles That Use 9004 Bulbs

2005 Pontiac Montana 2004 Oldsmobile Silhouette 2003 Dodge Ram Van 2003 Dodge Wagon 2002 Mercedes-Benz SL-class 2002 Mercedes-Benz SL500