What is the low beam headlight bulb size for a 2004 Dodge SX 2.0?

The 2004 Dodge SX 2.0 uses a 9007 bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 2004 Dodge SX 2.0?

The high beam bulb size for the 2004 Dodge SX 2.0 is N/A.

Why are my 2004 Dodge SX 2.0 headlights dim?

Dim headlights on a 2004 Dodge SX 2.0 can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a 9007 LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 2004 Dodge SX 2.0 fog light?

The 2004 Dodge SX 2.0 uses a H10 bulb for the fog light position.

Is the 2004 Dodge SX 2.0 single or dual beam?

The 2004 Dodge SX 2.0 uses a dual bulb headlight system. This means you have separate bulbs for high and low beams.

Can I install LED bulbs on my 2004 Dodge SX 2.0?

Yes, the 2004 Dodge SX 2.0 comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a 9007 LED conversion kit for the low beams.

Does the 2004 Dodge SX 2.0 have fog lights?

Yes, the 2004 Dodge SX 2.0 takes a H10 bulb for the fog light position.

Did the 2004 Dodge SX 2.0 change headlight bulb sizes from the previous year?

Yes — the 2004 Dodge SX 2.0 uses different bulb sizes than the 2003 model. The 2004 generation introduced this bulb configuration.

Is the 2004 Dodge SX 2.0 the first or last year to use 9007 bulbs?

The 2004 Dodge SX 2.0 is the only year in the 2004 generation to use the 9007 bulb for the low beam headlight.

How do I change the headlight on a 2004 Dodge SX 2.0?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old 9007 bulb counter-clockwise to remove it, then insert the new bulb and reassemble. Note: Dodge vehicles use a CANbus system, so LED replacements may need an anti-flicker decoder. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 2004 Dodge SX 2.0?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved 9007 LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 2004 Dodge SX 2.0 headlights?

A pair of halogen 9007 bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 2004 Dodge SX 2.0?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the 9007 position are available as direct plug-and-play replacements. Since the Dodge uses CANbus monitoring, choose a CANbus-compatible LED kit to avoid dashboard errors.

The 2004 Dodge SX 2.0 has a unique bulb configuration not shared with adjacent model years.

Fitment Guaranteed for 2004 Dodge SX 2.0

What Size Bulbs Does a 2004 Dodge SX 2.0 Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 2004 Dodge SX 2.0 Have?

Lighting on the 2004 Dodge SX 2.0 is managed by a total of 11 bulbs, covering everything from primary headlights to signal indicators. It features an extensive lighting system powered by a dual-bulb halogen configuration using separate 9007 low beam and high beam bulbs for precise light distribution. Note that Dodge vehicles typically feature a CANbus electrical monitor that checks for specific bulb resistance.

LED Flicker Warning

This vehicle is known to use a CANbus system. Installing standard LEDs may cause flickering.

Use a CANbus decoder.

Can You Put LED Bulbs in a 2004 Dodge SX 2.0?

Upgrading to LED is one of the most effective ways to modernize your Dodge's appearance and safety profile. We recommend starting your upgrade with the 9007 low beams, as they see the most use. Adding a matching LED kit later will complete the look and ensure consistent lighting performance. Because Dodge utilizes a CANbus system, standard LED bulbs may cause "bulb out" errors on your dashboard. Always opt for "Error-Free" or CANbus-ready kits which include the necessary resistors. Don't forget the H10 fog lights; switching these to LED can dramatically improve your visibility in adverse weather.

2004 Dodge SX 2.0 Bulb Size Chart

Position	Bulb Size	Shop
Turn Signal Front	3157CK	Buy 3157CK →
Side Marker	168	Buy 168 →
Fog Light	H10	Buy H10 →
Low Beam	9007	Buy 9007 →
Parking Light	3157CK	Buy 3157CK →
Turn Signal Rear	3157CK	Buy 3157CK →
License Plate	168	Buy 168 →
Tail Light	3157CK	Buy 3157CK →
Reverse Light	921	Buy 921 →
Brake Light	3157	Buy 3157 →
Trunk Light	906	Buy 906 →

How do the 2004 Dodge SX 2.0's bulbs compare to other years?

The 2004 Dodge SX 2.0 changed bulb sizes from 2003. The previous model year used a different configuration.

The 2005 model switched to a different bulb configuration.

This bulb configuration covers the 2004 model years. ← 2003 2005 →

Finding the best installation guide...

Other SX 2.0 Years

2005 2003

Other Vehicles That Use 9007 Bulbs

2022 Nissan Frontier 2020 Mitsubishi Mirage G4 2013 Suzuki SX4 2012 Suzuki Equator 2012 Suzuki SX4 Crossover 2010 Mazda B Series

9007 Comparisons

9007 vs HB5