What is the low beam headlight bulb size for a 1996 Dodge Ram Van?

The 1996 Dodge Ram Van uses a 9004 bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 1996 Dodge Ram Van?

The high beam bulb size for the 1996 Dodge Ram Van is N/A.

Why are my 1996 Dodge Ram Van headlights dim?

Dim headlights on a 1996 Dodge Ram Van can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a 9004 LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 1996 Dodge Ram Van fog light?

The 1996 Dodge Ram Van typically does not come with factory fog lights in all trim levels. If your vehicle is equipped with them, check the manual as sizes can vary by trim.

Is the 1996 Dodge Ram Van single or dual beam?

The 1996 Dodge Ram Van uses a dual bulb headlight system. This means you have separate bulbs for high and low beams.

Can I install LED bulbs on my 1996 Dodge Ram Van?

Yes, the 1996 Dodge Ram Van comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a 9004 LED conversion kit for the low beams.

Did the 1996 Dodge Ram Van change headlight bulb sizes from the previous year?

Yes — the 1996 Dodge Ram Van uses different bulb sizes than the 1995 model. The 1996 generation introduced this bulb configuration.

Is the 1996 Dodge Ram Van the first or last year to use 9004 bulbs?

The 1996 Dodge Ram Van is the only year in the 1996 generation to use the 9004 bulb for the low beam headlight.

How do I change the headlight on a 1996 Dodge Ram Van?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old 9004 bulb counter-clockwise to remove it, then insert the new bulb and reassemble. Note: Dodge vehicles use a CANbus system, so LED replacements may need an anti-flicker decoder. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 1996 Dodge Ram Van?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved 9004 LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 1996 Dodge Ram Van headlights?

A pair of halogen 9004 bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 1996 Dodge Ram Van?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the 9004 position are available as direct plug-and-play replacements. Since the Dodge uses CANbus monitoring, choose a CANbus-compatible LED kit to avoid dashboard errors.

The 1996 Dodge Ram Van has a unique bulb configuration not shared with adjacent model years.

Fitment Guaranteed for 1996 Dodge Ram Van

What Size Bulbs Does a 1996 Dodge Ram Van Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 1996 Dodge Ram Van Have?

When it comes to nighttime visibility, the 1996 Dodge Ram Van relies on an arrangement of 10 specialized bulbs. It features a comprehensive lighting system powered by a dual-bulb halogen configuration using separate 9004 low beam and high beam bulbs for precise light distribution. Note that Dodge vehicles typically feature a CANbus electrical monitor that checks for specific bulb resistance.

LED Flicker Warning

This vehicle is known to use a CANbus system. Installing standard LEDs may cause flickering.

Use a CANbus decoder.

Can You Put LED Bulbs in a 1996 Dodge Ram Van?

Upgrading to LED is one of the most effective ways to modernize your Dodge's appearance and safety profile. We recommend starting your upgrade with the 9004 low beams, as they see the most use. Adding a matching LED kit later will complete the look and ensure consistent lighting performance. Because Dodge utilizes a CANbus system, standard LED bulbs may cause "bulb out" errors on your dashboard. Always opt for "Error-Free" or CANbus-ready kits which include the necessary resistors.

1996 Dodge Ram Van Bulb Size Chart

Position	Bulb Size	Shop
Side Marker	194	Buy 194 →
Low Beam	9004	Buy 9004 →
Turn Signal Front	3157NA	Buy 3157NA →
Turn Signal Rear	3157	Buy 3157 →
License Plate	168	Buy 168 →
Tail Light	3157	Buy 3157 →
Reverse Light	921	Buy 921 →
Brake Light	912	Buy 912 →
Parking Light	3157NA	Buy 3157NA →
Map Light	906	Buy 906 →

How do the 1996 Dodge Ram Van's bulbs compare to other years?

The 1996 Dodge Ram Van changed bulb sizes from 1995. The previous model year used a different configuration.

The 1997 model switched to a different bulb configuration.

This bulb configuration covers the 1996 model years. ← 1995 1997 →

Finding the best installation guide...

Other Ram Van Years

2003 2002 2001 2000 1999 1998 1997 1995 1994 1993 1992 1991 1990 1989 1988 1987 1986 1985

Other Vehicles That Use 9004 Bulbs

2005 Pontiac Montana 2004 Oldsmobile Silhouette 2002 Mercedes-Benz SL-class 2002 Mercedes-Benz SL500 2002 Mercedes-Benz SL600 1999 Isuzu Amigo