What is the low beam headlight bulb size for a 2008 Dodge Ram 2500?

The 2008 Dodge Ram 2500 uses a H13 LED bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 2008 Dodge Ram 2500?

The high beam bulb size for the 2008 Dodge Ram 2500 is H13 LED.

Why are my 2008 Dodge Ram 2500 headlights dim?

Dim headlights on a 2008 Dodge Ram 2500 can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a H13 LED LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 2008 Dodge Ram 2500 fog light?

The 2008 Dodge Ram 2500 uses a 9006 LED bulb for the fog light position.

Is the 2008 Dodge Ram 2500 single or dual beam?

The 2008 Dodge Ram 2500 uses a single bulb (dual filament) headlight system. This means one bulb controls both high and low beams.

Can I install LED bulbs on my 2008 Dodge Ram 2500?

Yes, the 2008 Dodge Ram 2500 comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a H13 LED LED conversion kit for the low beams.

Does the 2008 Dodge Ram 2500 have fog lights?

Yes, the 2008 Dodge Ram 2500 takes a 9006 LED bulb for the fog light position.

How do I change the headlight on a 2008 Dodge Ram 2500?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old H13 LED bulb counter-clockwise to remove it, then insert the new bulb and reassemble. Note: Dodge vehicles use a CANbus system, so LED replacements may need an anti-flicker decoder. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 2008 Dodge Ram 2500?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved H13 LED LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 2008 Dodge Ram 2500 headlights?

A pair of halogen H13 LED bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 2008 Dodge Ram 2500?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the H13 LED position are available as direct plug-and-play replacements. Since the Dodge uses CANbus monitoring, choose a CANbus-compatible LED kit to avoid dashboard errors.

This vehicle is part of the 2007–2008 Dodge Ram 2500 generation. All models in this range share identical light bulb sizes.

Fitment Guaranteed for 2008 Dodge Ram 2500

What Size Bulbs Does a 2008 Dodge Ram 2500 Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 2008 Dodge Ram 2500 Have?

Lighting on the 2008 Dodge Ram 2500 is managed by a total of 13 bulbs, covering everything from primary headlights to signal indicators. It features an extensive lighting system powered by a halogen-based setup where a single H13 LED dual-filament bulb handles both low and high beam duties within the same reflector. Note that Dodge vehicles typically feature a CANbus electrical monitor that checks for specific bulb resistance.

LED Flicker Warning

This vehicle is known to use a CANbus system. Installing standard LEDs may cause flickering.

Use a CANbus decoder.

Can You Put LED Bulbs in a 2008 Dodge Ram 2500?

Upgrading to LED is one of the most effective ways to modernize your Dodge's appearance and safety profile. Since your Ram 2500 uses a single H13 LED bulb for both high and low beams, ensure your chosen LED kit is "dual-beam" compatible. This allows the LED circuitry to mimic the two-filament design of the original halogen bulb. Because Dodge utilizes a CANbus system, standard LED bulbs may cause "bulb out" errors on your dashboard. Always opt for "Error-Free" or CANbus-ready kits which include the necessary resistors. Don't forget the 9006 LED fog lights; switching these to LED can dramatically improve your visibility in adverse weather.

2008 Dodge Ram 2500 Bulb Size Chart

Position	Bulb Size	Shop
Low Beam	H13 LED	Buy H13 LED →
High Beam	H13 LED	Buy H13 LED →
Fog Light	9006 LED	Buy 9006 LED →
Brake Light	912 LED	Buy 912 LED →
Side Marker	2825 LED	Buy 2825 LED →
Turn Signal Front	3157NA LED	Buy 3157NA LED →
Turn Signal Rear	3157K LED	Buy 3157K LED →
Reverse Light	921	Buy 921 →
Dome Light	578	Buy 578 →
License Plate	168	Buy 168 →
Map Light	192 or 212-2	Buy 192 or 212-2 →
Parking Light	3157NA	Buy 3157NA →
Trunk Light	912	Buy 912 →