What is the low beam headlight bulb size for a 2011 Dodge Nitro?

The 2011 Dodge Nitro uses a H13 LED bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 2011 Dodge Nitro?

The high beam bulb size for the 2011 Dodge Nitro is H13 LED.

Why are my 2011 Dodge Nitro headlights dim?

Dim headlights on a 2011 Dodge Nitro can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a H13 LED LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 2011 Dodge Nitro fog light?

The 2011 Dodge Nitro uses a 2504 LED bulb for the fog light position.

Is the 2011 Dodge Nitro single or dual beam?

The 2011 Dodge Nitro uses a single bulb (dual filament) headlight system. This means one bulb controls both high and low beams.

Can I install LED bulbs on my 2011 Dodge Nitro?

Yes, the 2011 Dodge Nitro comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a H13 LED LED conversion kit for the low beams.

Does the 2011 Dodge Nitro have fog lights?

Yes, the 2011 Dodge Nitro takes a 2504 LED bulb for the fog light position.

Did the 2011 Dodge Nitro change headlight bulb sizes from the previous year?

No — the 2011 Dodge Nitro uses the same bulb sizes as the 2010 model. This configuration has been consistent across the 2010–2011 generation.

Is the 2011 Dodge Nitro the first or last year to use H13 LED bulbs?

The 2011 Dodge Nitro is the last year in the 2010–2011 generation to use the H13 LED bulb for the low beam headlight.

How do I change the headlight on a 2011 Dodge Nitro?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old H13 LED bulb counter-clockwise to remove it, then insert the new bulb and reassemble. Note: Dodge vehicles use a CANbus system, so LED replacements may need an anti-flicker decoder. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 2011 Dodge Nitro?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved H13 LED LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 2011 Dodge Nitro headlights?

A pair of halogen H13 LED bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 2011 Dodge Nitro?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the H13 LED position are available as direct plug-and-play replacements. Since the Dodge uses CANbus monitoring, choose a CANbus-compatible LED kit to avoid dashboard errors.

The 2011 Dodge Nitro is the last model year to use this bulb configuration (2010–2011).

Fitment Guaranteed for 2011 Dodge Nitro

What Size Bulbs Does a 2011 Dodge Nitro Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 2011 Dodge Nitro Have?

Owners of the 2011 Dodge Nitro will find a total of 14 lighting elements throughout the vehicle's exterior. It features an extensive lighting system powered by a halogen-based setup where a single H13 LED dual-filament bulb handles both low and high beam duties within the same reflector. This model belongs to the late years of the Nitro's 2007-2011 production span. Note that Dodge vehicles typically feature a CANbus electrical monitor that checks for specific bulb resistance.

LED Flicker Warning

This vehicle is known to use a CANbus system. Installing standard LEDs may cause flickering.

Use a CANbus decoder.

Can You Put LED Bulbs in a 2011 Dodge Nitro?

Upgrading to LED is one of the most effective ways to modernize your Dodge's appearance and safety profile. Since your Nitro uses a single H13 LED bulb for both high and low beams, ensure your chosen LED kit is "dual-beam" compatible. This allows the LED circuitry to mimic the two-filament design of the original halogen bulb. Because Dodge utilizes a CANbus system, standard LED bulbs may cause "bulb out" errors on your dashboard. Always opt for "Error-Free" or CANbus-ready kits which include the necessary resistors. Don't forget the 2504 LED fog lights; switching these to LED can dramatically improve your visibility in adverse weather.

2011 Dodge Nitro Bulb Size Chart

Position	Bulb Size	Shop
Low Beam	H13 LED	Buy H13 LED →
High Beam	H13 LED	Buy H13 LED →
Fog Light	2504 LED	Buy 2504 LED →
Brake Light	3157CK	Buy 3157CK →
Side Marker	3057K LED	Buy 3057K LED →
Turn Signal Front	3157AK LED	Buy 3157AK LED →
Turn Signal Rear	3057K LED	Buy 3057K LED →
Reverse Light	3057K	Buy 3057K →
Dome Light	578	Buy 578 →
License Plate	168	Buy 168 →
Map Light	578	Buy 578 →
Parking Light	3157AK	Buy 3157AK →
Trunk Light	578	Buy 578 →
Tail Light	3057	Buy 3057 →

How do the 2011 Dodge Nitro's bulbs compare to other years?

The 2011 Dodge Nitro uses the same bulbs as the 2010 model.

This bulb configuration covers the 2010–2011 model years. ← 2010

Finding the best installation guide...

Other Nitro Years

2010 2009 2008 2007

Other Vehicles That Use H13 LED Bulbs

2019 Ford E-350 Super Duty 2019 Jeep Renegade 2019 Jeep Wrangler 2019 Nissan NV1500 2019 Nissan NV200 2019 Nissan NV2500