What is the low beam headlight bulb size for a 1999 Dodge Neon?

The 1999 Dodge Neon uses a 9007 LED bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 1999 Dodge Neon?

The high beam bulb size for the 1999 Dodge Neon is 9007 LED.

Why are my 1999 Dodge Neon headlights dim?

Dim headlights on a 1999 Dodge Neon can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a 9007 LED LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 1999 Dodge Neon fog light?

The 1999 Dodge Neon uses a 881 LED bulb for the fog light position.

Is the 1999 Dodge Neon single or dual beam?

The 1999 Dodge Neon uses a single bulb (dual filament) headlight system. This means one bulb controls both high and low beams.

Can I install LED bulbs on my 1999 Dodge Neon?

Yes, the 1999 Dodge Neon comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a 9007 LED LED conversion kit for the low beams.

Does the 1999 Dodge Neon have fog lights?

Yes, the 1999 Dodge Neon takes a 881 LED bulb for the fog light position.

How do I change the headlight on a 1999 Dodge Neon?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old 9007 LED bulb counter-clockwise to remove it, then insert the new bulb and reassemble. Note: Dodge vehicles use a CANbus system, so LED replacements may need an anti-flicker decoder. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 1999 Dodge Neon?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved 9007 LED LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 1999 Dodge Neon headlights?

A pair of halogen 9007 LED bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 1999 Dodge Neon?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the 9007 LED position are available as direct plug-and-play replacements. Since the Dodge uses CANbus monitoring, choose a CANbus-compatible LED kit to avoid dashboard errors.

Fitment Guaranteed for 1999 Dodge Neon

What Size Bulbs Does a 1999 Dodge Neon Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 1999 Dodge Neon Have?

When it comes to nighttime visibility, the 1999 Dodge Neon relies on an arrangement of 13 specialized bulbs. It features an extensive lighting system powered by a halogen-based setup where a single 9007 LED dual-filament bulb handles both low and high beam duties within the same reflector. This model belongs to the early years of the Neon's 1998-2005 production span. Note that Dodge vehicles typically feature a CANbus electrical monitor that checks for specific bulb resistance.

LED Flicker Warning

This vehicle is known to use a CANbus system. Installing standard LEDs may cause flickering.

Use a CANbus decoder.

Can You Put LED Bulbs in a 1999 Dodge Neon?

Upgrading to LED is one of the most effective ways to modernize your Dodge's appearance and safety profile. Since your Neon uses a single 9007 LED bulb for both high and low beams, ensure your chosen LED kit is "dual-beam" compatible. This allows the LED circuitry to mimic the two-filament design of the original halogen bulb. Because Dodge utilizes a CANbus system, standard LED bulbs may cause "bulb out" errors on your dashboard. Always opt for "Error-Free" or CANbus-ready kits which include the necessary resistors. Don't forget the 881 LED fog lights; switching these to LED can dramatically improve your visibility in adverse weather.

1999 Dodge Neon Bulb Size Chart

Position	Bulb Size	Shop
Low Beam	9007 LED	Buy 9007 LED →
High Beam	9007 LED	Buy 9007 LED →
Fog Light	881 LED	Buy 881 LED →
Brake Light	921 LED	Buy 921 LED →
Side Marker	916 LED	Buy 916 LED →
Turn Signal Front	3157NA LED	Buy 3157NA LED →
Turn Signal Rear	3157 LED	Buy 3157 LED →
Reverse Light	3157	Buy 3157 →
Dome Light	578	Buy 578 →
License Plate	168	Buy 168 →
Map Light	906	Buy 906 →
Parking Light	3457AK	Buy 3457AK →
Trunk Light	912	Buy 912 →