What is the low beam headlight bulb size for a 1993 Dodge Intrepid?

The 1993 Dodge Intrepid uses a 9007 bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 1993 Dodge Intrepid?

The high beam bulb size for the 1993 Dodge Intrepid is N/A.

Why are my 1993 Dodge Intrepid headlights dim?

Dim headlights on a 1993 Dodge Intrepid can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a 9007 LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 1993 Dodge Intrepid fog light?

The 1993 Dodge Intrepid typically does not come with factory fog lights in all trim levels. If your vehicle is equipped with them, check the manual as sizes can vary by trim.

Is the 1993 Dodge Intrepid single or dual beam?

The 1993 Dodge Intrepid uses a dual bulb headlight system. This means you have separate bulbs for high and low beams.

Can I install LED bulbs on my 1993 Dodge Intrepid?

Yes, the 1993 Dodge Intrepid comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a 9007 LED conversion kit for the low beams.

How do I change the headlight on a 1993 Dodge Intrepid?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old 9007 bulb counter-clockwise to remove it, then insert the new bulb and reassemble. Note: Dodge vehicles use a CANbus system, so LED replacements may need an anti-flicker decoder. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 1993 Dodge Intrepid?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved 9007 LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 1993 Dodge Intrepid headlights?

A pair of halogen 9007 bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 1993 Dodge Intrepid?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the 9007 position are available as direct plug-and-play replacements. Since the Dodge uses CANbus monitoring, choose a CANbus-compatible LED kit to avoid dashboard errors.

The 1993 Dodge Intrepid has a unique bulb configuration not shared with adjacent model years.

Fitment Guaranteed for 1993 Dodge Intrepid

What Size Bulbs Does a 1993 Dodge Intrepid Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 1993 Dodge Intrepid Have?

Lighting on the 1993 Dodge Intrepid is managed by a total of 9 bulbs, covering everything from primary headlights to signal indicators. It features a comprehensive lighting system powered by a dual-bulb halogen configuration using separate 9007 low beam and high beam bulbs for precise light distribution. This model belongs to the early years of the Intrepid's 1993-2004 production span. Note that Dodge vehicles typically feature a CANbus electrical monitor that checks for specific bulb resistance.

LED Flicker Warning

This vehicle is known to use a CANbus system. Installing standard LEDs may cause flickering.

Use a CANbus decoder.

Can You Put LED Bulbs in a 1993 Dodge Intrepid?

Upgrading to LED is one of the most effective ways to modernize your Dodge's appearance and safety profile. We recommend starting your upgrade with the 9007 low beams, as they see the most use. Adding a matching LED kit later will complete the look and ensure consistent lighting performance. Because Dodge utilizes a CANbus system, standard LED bulbs may cause "bulb out" errors on your dashboard. Always opt for "Error-Free" or CANbus-ready kits which include the necessary resistors.

1993 Dodge Intrepid Bulb Size Chart

Position	Bulb Size	Shop
Low Beam	9007	Buy 9007 →
Side Marker	3157CK	Buy 3157CK →
Turn Signal Front	3157CK	Buy 3157CK →
Parking Light	3157NA	Buy 3157NA →
Reverse Light	3157CK	Buy 3157CK →
Brake Light	3157CK	Buy 3157CK →
Turn Signal Rear	3157	Buy 3157 →
Tail Light	3157	Buy 3157 →
License Plate	168	Buy 168 →

How do the 1993 Dodge Intrepid's bulbs compare to other years?

The 1994 model switched to a different bulb configuration.

This bulb configuration covers the 1993 model years. 1994 →

Finding the best installation guide...

Other Intrepid Years

2004 2003 2002 2001 2000 1999 1998 1997 1996 1995 1994

Other Vehicles That Use 9007 Bulbs

2022 Nissan Frontier 2020 Mitsubishi Mirage G4 2013 Suzuki SX4 2012 Suzuki Equator 2012 Suzuki SX4 Crossover 2010 Mazda B Series

9007 Comparisons

9007 vs HB5