What is the low beam headlight bulb size for a 1969 Dodge D200 Pickup?

The 1969 Dodge D200 Pickup uses a H6024 bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 1969 Dodge D200 Pickup?

The high beam bulb size for the 1969 Dodge D200 Pickup is N/A.

Why are my 1969 Dodge D200 Pickup headlights dim?

Dim headlights on a 1969 Dodge D200 Pickup can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a H6024 LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 1969 Dodge D200 Pickup fog light?

The 1969 Dodge D200 Pickup typically does not come with factory fog lights in all trim levels. If your vehicle is equipped with them, check the manual as sizes can vary by trim.

Is the 1969 Dodge D200 Pickup single or dual beam?

The 1969 Dodge D200 Pickup uses a dual bulb headlight system. This means you have separate bulbs for high and low beams.

Can I install LED bulbs on my 1969 Dodge D200 Pickup?

Yes, the 1969 Dodge D200 Pickup comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a H6024 LED conversion kit for the low beams.

Did the 1969 Dodge D200 Pickup change headlight bulb sizes from the previous year?

No — the 1969 Dodge D200 Pickup uses the same bulb sizes as the 1968 model. This configuration has been consistent across the 1968–1971 generation.

How do I change the headlight on a 1969 Dodge D200 Pickup?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old H6024 bulb counter-clockwise to remove it, then insert the new bulb and reassemble. Note: Dodge vehicles use a CANbus system, so LED replacements may need an anti-flicker decoder. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 1969 Dodge D200 Pickup?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved H6024 LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 1969 Dodge D200 Pickup headlights?

A pair of halogen H6024 bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 1969 Dodge D200 Pickup?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the H6024 position are available as direct plug-and-play replacements. Since the Dodge uses CANbus monitoring, choose a CANbus-compatible LED kit to avoid dashboard errors.

The 1969 Dodge D200 Pickup shares its bulb sizes with the 1968–1971 generation.

Fitment Guaranteed for 1969 Dodge D200 Pickup

What Size Bulbs Does a 1969 Dodge D200 Pickup Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 1969 Dodge D200 Pickup Have?

Lighting on the 1969 Dodge D200 Pickup is managed by a total of 1 bulbs, covering everything from primary headlights to signal indicators. It features a standard lighting system powered by a dual-bulb halogen configuration using separate H6024 low beam and high beam bulbs for precise light distribution. Note that Dodge vehicles typically feature a CANbus electrical monitor that checks for specific bulb resistance.

LED Flicker Warning

This vehicle is known to use a CANbus system. Installing standard LEDs may cause flickering.

Use a CANbus decoder.

Can You Put LED Bulbs in a 1969 Dodge D200 Pickup?

Upgrading to LED is one of the most effective ways to modernize your Dodge's appearance and safety profile. We recommend starting your upgrade with the H6024 low beams, as they see the most use. Adding a matching LED kit later will complete the look and ensure consistent lighting performance. Because Dodge utilizes a CANbus system, standard LED bulbs may cause "bulb out" errors on your dashboard. Always opt for "Error-Free" or CANbus-ready kits which include the necessary resistors.

1969 Dodge D200 Pickup Bulb Size Chart

Position	Bulb Size	Shop
Low Beam	H6024	Buy H6024 →

How do the 1969 Dodge D200 Pickup's bulbs compare to other years?

The 1969 Dodge D200 Pickup uses the same bulbs as the 1968 model.

The 1970 model continues with the same bulb sizes.

This bulb configuration covers the 1968–1971 model years. ← 1968 1970 →

Finding the best installation guide...

Other D200 Pickup Years

1974 1973 1972 1971 1970 1968 1959 1958

Other Vehicles That Use H6024 Bulbs

2006 Hummer H1 1998 Bentley Turbo R 1997 Mazda Miata 1996 Mazda MX-5 Miata 1995 Land Rover Range Rover 1991 Mitsubishi Montero