What is the low beam headlight bulb size for a 2012 Dodge Caliber?

The 2012 Dodge Caliber uses a H13 bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 2012 Dodge Caliber?

The high beam bulb size for the 2012 Dodge Caliber is N/A.

Why are my 2012 Dodge Caliber headlights dim?

Dim headlights on a 2012 Dodge Caliber can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a H13 LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 2012 Dodge Caliber fog light?

The 2012 Dodge Caliber typically does not come with factory fog lights in all trim levels. If your vehicle is equipped with them, check the manual as sizes can vary by trim.

Is the 2012 Dodge Caliber single or dual beam?

The 2012 Dodge Caliber uses a dual bulb headlight system. This means you have separate bulbs for high and low beams.

Can I install LED bulbs on my 2012 Dodge Caliber?

Yes, the 2012 Dodge Caliber comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a H13 LED conversion kit for the low beams.

Did the 2012 Dodge Caliber change headlight bulb sizes from the previous year?

Yes — the 2012 Dodge Caliber uses different bulb sizes than the 2011 model. The 2012 generation introduced this bulb configuration.

Is the 2012 Dodge Caliber the first or last year to use H13 bulbs?

The 2012 Dodge Caliber is the only year in the 2012 generation to use the H13 bulb for the low beam headlight.

How do I change the headlight on a 2012 Dodge Caliber?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old H13 bulb counter-clockwise to remove it, then insert the new bulb and reassemble. Note: Dodge vehicles use a CANbus system, so LED replacements may need an anti-flicker decoder. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 2012 Dodge Caliber?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved H13 LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 2012 Dodge Caliber headlights?

A pair of halogen H13 bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 2012 Dodge Caliber?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the H13 position are available as direct plug-and-play replacements. Since the Dodge uses CANbus monitoring, choose a CANbus-compatible LED kit to avoid dashboard errors.

The 2012 Dodge Caliber has a unique bulb configuration not shared with adjacent model years.

Fitment Guaranteed for 2012 Dodge Caliber

What Size Bulbs Does a 2012 Dodge Caliber Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 2012 Dodge Caliber Have?

The 2012 Dodge Caliber utilizes a refined lighting configuration featuring 9 distinct bulb positions. It features a comprehensive lighting system powered by a dual-bulb halogen configuration using separate H13 low beam and high beam bulbs for precise light distribution. This model belongs to the late years of the Caliber's 2007-2012 production span. Note that Dodge vehicles typically feature a CANbus electrical monitor that checks for specific bulb resistance.

LED Flicker Warning

This vehicle is known to use a CANbus system. Installing standard LEDs may cause flickering.

Use a CANbus decoder.

Can You Put LED Bulbs in a 2012 Dodge Caliber?

Upgrading to LED is one of the most effective ways to modernize your Dodge's appearance and safety profile. We recommend starting your upgrade with the H13 low beams, as they see the most use. Adding a matching LED kit later will complete the look and ensure consistent lighting performance. Because Dodge utilizes a CANbus system, standard LED bulbs may cause "bulb out" errors on your dashboard. Always opt for "Error-Free" or CANbus-ready kits which include the necessary resistors.

2012 Dodge Caliber Bulb Size Chart

Position	Bulb Size	Shop
Low Beam	H13	Buy H13 →
Side Marker	3157CK	Buy 3157CK →
Turn Signal Front	3157CK	Buy 3157CK →
License Plate	W5W	Buy W5W →
Brake Light	3157CK	Buy 3157CK →
Reverse Light	921	Buy 921 →
Parking Light	3157CK	Buy 3157CK →
Turn Signal Rear	3157CK	Buy 3157CK →
Tail Light	3157CK	Buy 3157CK →

How do the 2012 Dodge Caliber's bulbs compare to other years?

The 2012 Dodge Caliber changed bulb sizes from 2011. The previous model year used a different configuration.

This bulb configuration covers the 2012 model years. ← 2011

Finding the best installation guide...

Other Caliber Years

2011 2010 2009 2008 2007

Other Vehicles That Use H13 Bulbs

2022 Ford E-350 Super Duty 2022 Ford F-250 Super Duty 2022 Ford F-350 Super Duty 2022 Ford F-450 Super Duty 2022 Ford F-550 Super Duty 2022 Ford F-600 Super Duty

H13 Comparisons

9008 vs H13