What is the low beam headlight bulb size for a 2008 Chrysler PT Cruiser?

The 2008 Chrysler PT Cruiser uses a 9006XS LED bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 2008 Chrysler PT Cruiser?

The high beam bulb size for the 2008 Chrysler PT Cruiser is LED Bulb.

Why are my 2008 Chrysler PT Cruiser headlights dim?

Dim headlights on a 2008 Chrysler PT Cruiser can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a 9006XS LED LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 2008 Chrysler PT Cruiser fog light?

The 2008 Chrysler PT Cruiser uses a 9145 LED bulb for the fog light position.

Is the 2008 Chrysler PT Cruiser single or dual beam?

The 2008 Chrysler PT Cruiser uses a dual bulb headlight system. This means you have separate bulbs for high and low beams.

Can I install LED bulbs on my 2008 Chrysler PT Cruiser?

Yes, the 2008 Chrysler PT Cruiser comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a 9006XS LED LED conversion kit for the low beams.

Does the 2008 Chrysler PT Cruiser have fog lights?

Yes, the 2008 Chrysler PT Cruiser takes a 9145 LED bulb for the fog light position.

How do I change the headlight on a 2008 Chrysler PT Cruiser?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old 9006XS LED bulb counter-clockwise to remove it, then insert the new bulb and reassemble. Note: Chrysler vehicles use a CANbus system, so LED replacements may need an anti-flicker decoder. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 2008 Chrysler PT Cruiser?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved 9006XS LED LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 2008 Chrysler PT Cruiser headlights?

A pair of halogen 9006XS LED bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 2008 Chrysler PT Cruiser?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the 9006XS LED position are available as direct plug-and-play replacements. Since the Chrysler uses CANbus monitoring, choose a CANbus-compatible LED kit to avoid dashboard errors.

This vehicle is part of the 2006–2010 Chrysler PT Cruiser generation. All models in this range share identical light bulb sizes.

Fitment Guaranteed for 2008 Chrysler PT Cruiser

What Size Bulbs Does a 2008 Chrysler PT Cruiser Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 2008 Chrysler PT Cruiser Have?

When it comes to nighttime visibility, the 2008 Chrysler PT Cruiser relies on an arrangement of 13 specialized bulbs. It features an extensive lighting system powered by a dual-bulb halogen configuration using separate 9006XS LED low beam and LED Bulb high beam bulbs for precise light distribution. Note that Chrysler vehicles typically feature a CANbus electrical monitor that checks for specific bulb resistance.

LED Flicker Warning

This vehicle is known to use a CANbus system. Installing standard LEDs may cause flickering.

Use a CANbus decoder.

Can You Put LED Bulbs in a 2008 Chrysler PT Cruiser?

Upgrading to LED is one of the most effective ways to modernize your Chrysler's appearance and safety profile. We recommend starting your upgrade with the 9006XS LED low beams, as they see the most use. Adding a matching LED Bulb LED kit later will complete the look and ensure consistent lighting performance. Because Chrysler utilizes a CANbus system, standard LED bulbs may cause "bulb out" errors on your dashboard. Always opt for "Error-Free" or CANbus-ready kits which include the necessary resistors. Don't forget the 9145 LED fog lights; switching these to LED can dramatically improve your visibility in adverse weather.

2008 Chrysler PT Cruiser Bulb Size Chart

Position	Bulb Size	Shop
Low Beam	9006XS LED	Buy 9006XS LED →
High Beam	LED Bulb	Buy LED Bulb →
Fog Light	9145 LED	Buy 9145 LED →
Brake Light	LED Bulb	Buy LED Bulb →
Side Marker	3157 LED	Buy 3157 LED →
Turn Signal Front	4157NA LED	Buy 4157NA LED →
Turn Signal Rear	3757AK LED	Buy 3757AK LED →
Dome Light	578	Buy 578 →
License Plate	168	Buy 168 →
Map Light	192	Buy 192 →
Parking Light	4157NA	Buy 4157NA →
Reverse Light	3157	Buy 3157 →
Trunk Light	904	Buy 904 →

Installation Guide

Open in YouTube →

Video suggestion: Installation GuideBy YouTube

Other PT Cruiser Years

2010 2009 2006 2005 2004 2003 2002 2001

More from Chrysler

200 300 300C 300M Aspen Cirrus Concorde Conquest

Other Vehicles That Use 9006XS LED Bulbs

2008 Dodge Charger 2004 Dodge Intrepid 2004 Dodge Viper 2004 Jeep Grand Cherokee