What is the low beam headlight bulb size for a 1993 Chrysler New Yorker?

The 1993 Chrysler New Yorker uses a H4703 LED bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 1993 Chrysler New Yorker?

The high beam bulb size for the 1993 Chrysler New Yorker is PC194.

Why are my 1993 Chrysler New Yorker headlights dim?

Dim headlights on a 1993 Chrysler New Yorker can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a H4703 LED LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 1993 Chrysler New Yorker fog light?

The 1993 Chrysler New Yorker uses a LED Fog Light bulb for the fog light position.

Is the 1993 Chrysler New Yorker single or dual beam?

The 1993 Chrysler New Yorker uses a dual bulb headlight system. This means you have separate bulbs for high and low beams.

Can I install LED bulbs on my 1993 Chrysler New Yorker?

Yes, the 1993 Chrysler New Yorker comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a H4703 LED LED conversion kit for the low beams.

Does the 1993 Chrysler New Yorker have fog lights?

Yes, the 1993 Chrysler New Yorker takes a LED Fog Light bulb for the fog light position.

How do I change the headlight on a 1993 Chrysler New Yorker?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old H4703 LED bulb counter-clockwise to remove it, then insert the new bulb and reassemble. Note: Chrysler vehicles use a CANbus system, so LED replacements may need an anti-flicker decoder. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 1993 Chrysler New Yorker?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved H4703 LED LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 1993 Chrysler New Yorker headlights?

A pair of halogen H4703 LED bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 1993 Chrysler New Yorker?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the H4703 LED position are available as direct plug-and-play replacements. Since the Chrysler uses CANbus monitoring, choose a CANbus-compatible LED kit to avoid dashboard errors.

Fitment Guaranteed for 1993 Chrysler New Yorker

What Size Bulbs Does a 1993 Chrysler New Yorker Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 1993 Chrysler New Yorker Have?

The 1993 Chrysler New Yorker utilizes a refined lighting configuration featuring 13 distinct bulb positions. It features an extensive lighting system powered by a dual-bulb halogen configuration using separate H4703 LED low beam and PC194 high beam bulbs for precise light distribution. Note that Chrysler vehicles typically feature a CANbus electrical monitor that checks for specific bulb resistance.

LED Flicker Warning

This vehicle is known to use a CANbus system. Installing standard LEDs may cause flickering.

Use a CANbus decoder.

Can You Put LED Bulbs in a 1993 Chrysler New Yorker?

Upgrading to LED is one of the most effective ways to modernize your Chrysler's appearance and safety profile. We recommend starting your upgrade with the H4703 LED low beams, as they see the most use. Adding a matching PC194 LED kit later will complete the look and ensure consistent lighting performance. Because Chrysler utilizes a CANbus system, standard LED bulbs may cause "bulb out" errors on your dashboard. Always opt for "Error-Free" or CANbus-ready kits which include the necessary resistors. Don't forget the LED Fog Light fog lights; switching these to LED can dramatically improve your visibility in adverse weather.

1993 Chrysler New Yorker Bulb Size Chart

Position	Bulb Size	Shop
Low Beam	H4703 LED	Buy H4703 LED →
High Beam	PC194	Buy PC194 →
Fog Light	LED Fog Light	Buy LED Fog Light →
Brake Light	PC194	Buy PC194 →
Side Marker	916	Buy 916 →
Turn Signal Front	3157NA LED	Buy 3157NA LED →
Turn Signal Rear	3057 LED	Buy 3057 LED →
Reverse Light	922	Buy 922 →
Dome Light	214-2	Buy 214-2 →
License Plate	168	Buy 168 →
Map Light	906	Buy 906 →
Parking Light	3157NA	Buy 3157NA →
Trunk Light	105	Buy 105 →

Installation Guide

Open in YouTube →

Video suggestion: Installation GuideBy YouTube

Other New Yorker Years

1996 1995 1994 1991 1990

More from Chrysler

200 300 300C 300M Aspen Cirrus Concorde Conquest

Other Vehicles That Use H4703 LED Bulbs

1991 GMC Jimmy 1990 Jeep Wagoneer