What is the low beam headlight bulb size for a 1993 Chrysler LeBaron?

The 1993 Chrysler LeBaron uses a 9004 LED bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 1993 Chrysler LeBaron?

The high beam bulb size for the 1993 Chrysler LeBaron is 103.

Why are my 1993 Chrysler LeBaron headlights dim?

Dim headlights on a 1993 Chrysler LeBaron can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a 9004 LED LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 1993 Chrysler LeBaron fog light?

The 1993 Chrysler LeBaron uses a LED Fog Light bulb for the fog light position.

Is the 1993 Chrysler LeBaron single or dual beam?

The 1993 Chrysler LeBaron uses a dual bulb headlight system. This means you have separate bulbs for high and low beams.

Can I install LED bulbs on my 1993 Chrysler LeBaron?

Yes, the 1993 Chrysler LeBaron comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a 9004 LED LED conversion kit for the low beams.

Does the 1993 Chrysler LeBaron have fog lights?

Yes, the 1993 Chrysler LeBaron takes a LED Fog Light bulb for the fog light position.

How do I change the headlight on a 1993 Chrysler LeBaron?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old 9004 LED bulb counter-clockwise to remove it, then insert the new bulb and reassemble. Note: Chrysler vehicles use a CANbus system, so LED replacements may need an anti-flicker decoder. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 1993 Chrysler LeBaron?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved 9004 LED LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 1993 Chrysler LeBaron headlights?

A pair of halogen 9004 LED bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 1993 Chrysler LeBaron?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the 9004 LED position are available as direct plug-and-play replacements. Since the Chrysler uses CANbus monitoring, choose a CANbus-compatible LED kit to avoid dashboard errors.

Fitment Guaranteed for 1993 Chrysler LeBaron

What Size Bulbs Does a 1993 Chrysler LeBaron Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 1993 Chrysler LeBaron Have?

When it comes to nighttime visibility, the 1993 Chrysler LeBaron relies on an arrangement of 13 specialized bulbs. It features an extensive lighting system powered by a dual-bulb halogen configuration using separate 9004 LED low beam and 103 high beam bulbs for precise light distribution. This model belongs to the late years of the LeBaron's 1988-1993 production span. Note that Chrysler vehicles typically feature a CANbus electrical monitor that checks for specific bulb resistance.

LED Flicker Warning

This vehicle is known to use a CANbus system. Installing standard LEDs may cause flickering.

Use a CANbus decoder.

Can You Put LED Bulbs in a 1993 Chrysler LeBaron?

Upgrading to LED is one of the most effective ways to modernize your Chrysler's appearance and safety profile. We recommend starting your upgrade with the 9004 LED low beams, as they see the most use. Adding a matching 103 LED kit later will complete the look and ensure consistent lighting performance. Because Chrysler utilizes a CANbus system, standard LED bulbs may cause "bulb out" errors on your dashboard. Always opt for "Error-Free" or CANbus-ready kits which include the necessary resistors. Don't forget the LED Fog Light fog lights; switching these to LED can dramatically improve your visibility in adverse weather.

1993 Chrysler LeBaron Bulb Size Chart

Position	Bulb Size	Shop
Low Beam	9004 LED	Buy 9004 LED →
High Beam	103	Buy 103 →
Fog Light	LED Fog Light	Buy LED Fog Light →
Brake Light	103	Buy 103 →
Side Marker	916 LED	Buy 916 LED →
Turn Signal Front	3157 LED or 3157NA LED	Buy 3157 LED or 3157NA LED →
Turn Signal Rear	3157 LED	Buy 3157 LED →
Reverse Light	3157	Buy 3157 →
Dome Light	211-2	Buy 211-2 →
License Plate	168	Buy 168 →
Map Light	906	Buy 906 →
Parking Light	3157 or 3157NA	Buy 3157 or 3157NA →
Trunk Light	105	Buy 105 →

Installation Guide

Open in YouTube →

Video suggestion: Installation GuideBy YouTube

Other LeBaron Years

1992 1990 1988

More from Chrysler

200 300 300C 300M Aspen Cirrus Concorde Conquest

Other Vehicles That Use 9004 LED Bulbs

2005 Chevrolet Venture 2003 Isuzu Rodeo Sport 2002 Dodge Ram 2500 2002 Dodge Ram 3500 2002 Isuzu Trooper 2001 Nissan Xterra