What is the low beam headlight bulb size for a 2000 Chrysler Grand Voyager?

The 2000 Chrysler Grand Voyager uses a 9007 bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 2000 Chrysler Grand Voyager?

The high beam bulb size for the 2000 Chrysler Grand Voyager is N/A.

Why are my 2000 Chrysler Grand Voyager headlights dim?

Dim headlights on a 2000 Chrysler Grand Voyager can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a 9007 LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 2000 Chrysler Grand Voyager fog light?

The 2000 Chrysler Grand Voyager typically does not come with factory fog lights in all trim levels. If your vehicle is equipped with them, check the manual as sizes can vary by trim.

Is the 2000 Chrysler Grand Voyager single or dual beam?

The 2000 Chrysler Grand Voyager uses a dual bulb headlight system. This means you have separate bulbs for high and low beams.

Can I install LED bulbs on my 2000 Chrysler Grand Voyager?

Yes, the 2000 Chrysler Grand Voyager comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a 9007 LED conversion kit for the low beams.

How do I change the headlight on a 2000 Chrysler Grand Voyager?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old 9007 bulb counter-clockwise to remove it, then insert the new bulb and reassemble. Note: Chrysler vehicles use a CANbus system, so LED replacements may need an anti-flicker decoder. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 2000 Chrysler Grand Voyager?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved 9007 LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 2000 Chrysler Grand Voyager headlights?

A pair of halogen 9007 bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 2000 Chrysler Grand Voyager?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the 9007 position are available as direct plug-and-play replacements. Since the Chrysler uses CANbus monitoring, choose a CANbus-compatible LED kit to avoid dashboard errors.

The 2000 Chrysler Grand Voyager has a unique bulb configuration not shared with adjacent model years.

Fitment Guaranteed for 2000 Chrysler Grand Voyager

What Size Bulbs Does a 2000 Chrysler Grand Voyager Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 2000 Chrysler Grand Voyager Have?

When it comes to nighttime visibility, the 2000 Chrysler Grand Voyager relies on an arrangement of 9 specialized bulbs. It features a comprehensive lighting system powered by a dual-bulb halogen configuration using separate 9007 low beam and high beam bulbs for precise light distribution. Note that Chrysler vehicles typically feature a CANbus electrical monitor that checks for specific bulb resistance.

LED Flicker Warning

This vehicle is known to use a CANbus system. Installing standard LEDs may cause flickering.

Use a CANbus decoder.

Can You Put LED Bulbs in a 2000 Chrysler Grand Voyager?

Upgrading to LED is one of the most effective ways to modernize your Chrysler's appearance and safety profile. We recommend starting your upgrade with the 9007 low beams, as they see the most use. Adding a matching LED kit later will complete the look and ensure consistent lighting performance. Because Chrysler utilizes a CANbus system, standard LED bulbs may cause "bulb out" errors on your dashboard. Always opt for "Error-Free" or CANbus-ready kits which include the necessary resistors.

2000 Chrysler Grand Voyager Bulb Size Chart

Position	Bulb Size	Shop
Side Marker	3157NA	Buy 3157NA →
Turn Signal Front	3157NA	Buy 3157NA →
Low Beam	9007	Buy 9007 →
Brake Light	3057	Buy 3057 →
Parking Light	3157CK	Buy 3157CK →
Turn Signal Rear	3057	Buy 3057 →
Tail Light	3057	Buy 3057 →
License Plate	168	Buy 168 →
Reverse Light	3157CK	Buy 3157CK →

How do the 2000 Chrysler Grand Voyager's bulbs compare to other years?

This bulb configuration covers the 2000 model years.

Finding the best installation guide...

Other Grand Voyager Years

More from Chrysler

200 300 300C 300M Aspen Cirrus Concorde Conquest

Other Vehicles That Use 9007 Bulbs

2022 Nissan Frontier 2020 Mitsubishi Mirage G4 2013 Suzuki SX4 2012 Suzuki Equator 2012 Suzuki SX4 Crossover 2010 Mazda B Series

9007 Comparisons

9007 vs HB5