What is the low beam headlight bulb size for a 1988 Chrysler Dynasty?

The 1988 Chrysler Dynasty uses a 9004 bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 1988 Chrysler Dynasty?

The high beam bulb size for the 1988 Chrysler Dynasty is 194.

Why are my 1988 Chrysler Dynasty headlights dim?

Dim headlights on a 1988 Chrysler Dynasty can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a 9004 LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 1988 Chrysler Dynasty fog light?

The 1988 Chrysler Dynasty typically does not come with factory fog lights in all trim levels. If your vehicle is equipped with them, check the manual as sizes can vary by trim.

Is the 1988 Chrysler Dynasty single or dual beam?

The 1988 Chrysler Dynasty uses a dual bulb headlight system. This means you have separate bulbs for high and low beams.

Can I install LED bulbs on my 1988 Chrysler Dynasty?

Yes, the 1988 Chrysler Dynasty comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a 9004 LED conversion kit for the low beams.

How do I change the headlight on a 1988 Chrysler Dynasty?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old 9004 bulb counter-clockwise to remove it, then insert the new bulb and reassemble. Note: Chrysler vehicles use a CANbus system, so LED replacements may need an anti-flicker decoder. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 1988 Chrysler Dynasty?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved 9004 LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 1988 Chrysler Dynasty headlights?

A pair of halogen 9004 bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 1988 Chrysler Dynasty?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the 9004 position are available as direct plug-and-play replacements. Since the Chrysler uses CANbus monitoring, choose a CANbus-compatible LED kit to avoid dashboard errors.

The 1988 Chrysler Dynasty has a unique bulb configuration not shared with adjacent model years.

Fitment Guaranteed for 1988 Chrysler Dynasty

What Size Bulbs Does a 1988 Chrysler Dynasty Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 1988 Chrysler Dynasty Have?

Lighting on the 1988 Chrysler Dynasty is managed by a total of 10 bulbs, covering everything from primary headlights to signal indicators. It features a comprehensive lighting system powered by a dual-bulb halogen configuration using separate 9004 low beam and 194 high beam bulbs for precise light distribution. This model belongs to the early years of the Dynasty's 1988-1993 production span. Note that Chrysler vehicles typically feature a CANbus electrical monitor that checks for specific bulb resistance.

LED Flicker Warning

This vehicle is known to use a CANbus system. Installing standard LEDs may cause flickering.

Use a CANbus decoder.

Can You Put LED Bulbs in a 1988 Chrysler Dynasty?

Upgrading to LED is one of the most effective ways to modernize your Chrysler's appearance and safety profile. We recommend starting your upgrade with the 9004 low beams, as they see the most use. Adding a matching 194 LED kit later will complete the look and ensure consistent lighting performance. Because Chrysler utilizes a CANbus system, standard LED bulbs may cause "bulb out" errors on your dashboard. Always opt for "Error-Free" or CANbus-ready kits which include the necessary resistors.

1988 Chrysler Dynasty Bulb Size Chart

Position	Bulb Size	Shop
Turn Signal Front	3057NA	Buy 3057NA →
Low Beam	9004	Buy 9004 →
Side Marker	168	Buy 168 →
Tail Light	3057	Buy 3057 →
Brake Light	922	Buy 922 →
Parking Light	3057NA	Buy 3057NA →
Reverse Light	3157CK	Buy 3157CK →
License Plate	194	Buy 194 →
Turn Signal Rear	3157CK	Buy 3157CK →
High Beam	194	Buy 194 →

How do the 1988 Chrysler Dynasty's bulbs compare to other years?

The 1989 model switched to a different bulb configuration.

This bulb configuration covers the 1988 model years. 1989 →

Finding the best installation guide...

Other Dynasty Years

1993 1992 1991 1989

More from Chrysler

200 300 300C 300M Aspen Cirrus Concorde Conquest

Other Vehicles That Use 9004 Bulbs

2005 Pontiac Montana 2004 Oldsmobile Silhouette 2003 Dodge Ram Van 2003 Dodge Wagon 2002 Mercedes-Benz SL-class 2002 Mercedes-Benz SL500