What is the low beam headlight bulb size for a 1990 Chrysler Daytona?

The 1990 Chrysler Daytona uses a H4666 LED bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 1990 Chrysler Daytona?

The high beam bulb size for the 1990 Chrysler Daytona is 194.

Why are my 1990 Chrysler Daytona headlights dim?

Dim headlights on a 1990 Chrysler Daytona can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a H4666 LED LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 1990 Chrysler Daytona fog light?

The 1990 Chrysler Daytona uses a LED Fog Light bulb for the fog light position.

Is the 1990 Chrysler Daytona single or dual beam?

The 1990 Chrysler Daytona uses a dual bulb headlight system. This means you have separate bulbs for high and low beams.

Can I install LED bulbs on my 1990 Chrysler Daytona?

Yes, the 1990 Chrysler Daytona comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a H4666 LED LED conversion kit for the low beams.

Does the 1990 Chrysler Daytona have fog lights?

Yes, the 1990 Chrysler Daytona takes a LED Fog Light bulb for the fog light position.

How do I change the headlight on a 1990 Chrysler Daytona?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old H4666 LED bulb counter-clockwise to remove it, then insert the new bulb and reassemble. Note: Chrysler vehicles use a CANbus system, so LED replacements may need an anti-flicker decoder. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 1990 Chrysler Daytona?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved H4666 LED LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 1990 Chrysler Daytona headlights?

A pair of halogen H4666 LED bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 1990 Chrysler Daytona?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the H4666 LED position are available as direct plug-and-play replacements. Since the Chrysler uses CANbus monitoring, choose a CANbus-compatible LED kit to avoid dashboard errors.

Fitment Guaranteed for 1990 Chrysler Daytona

What Size Bulbs Does a 1990 Chrysler Daytona Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 1990 Chrysler Daytona Have?

When it comes to nighttime visibility, the 1990 Chrysler Daytona relies on an arrangement of 13 specialized bulbs. It features an extensive lighting system powered by a dual-bulb halogen configuration using separate H4666 LED low beam and 194 high beam bulbs for precise light distribution. This model belongs to the mid years of the Daytona's 1988-1993 production span. Note that Chrysler vehicles typically feature a CANbus electrical monitor that checks for specific bulb resistance.

LED Flicker Warning

This vehicle is known to use a CANbus system. Installing standard LEDs may cause flickering.

Use a CANbus decoder.

Can You Put LED Bulbs in a 1990 Chrysler Daytona?

Upgrading to LED is one of the most effective ways to modernize your Chrysler's appearance and safety profile. We recommend starting your upgrade with the H4666 LED low beams, as they see the most use. Adding a matching 194 LED kit later will complete the look and ensure consistent lighting performance. Because Chrysler utilizes a CANbus system, standard LED bulbs may cause "bulb out" errors on your dashboard. Always opt for "Error-Free" or CANbus-ready kits which include the necessary resistors. Don't forget the LED Fog Light fog lights; switching these to LED can dramatically improve your visibility in adverse weather.

1990 Chrysler Daytona Bulb Size Chart

Position	Bulb Size	Shop
Low Beam	H4666 LED	Buy H4666 LED →
High Beam	194	Buy 194 →
Fog Light	LED Fog Light	Buy LED Fog Light →
Brake Light	194	Buy 194 →
Side Marker	904 LED	Buy 904 LED →
Turn Signal Front	2057NA LED or 3057NA LED	Buy 2057NA LED or 3057NA LED →
Turn Signal Rear	3057 LED	Buy 3057 LED →
Reverse Light	3057	Buy 3057 →
Dome Light	211-2	Buy 211-2 →
License Plate	168	Buy 168 →
Map Light	906	Buy 906 →
Parking Light	2057NA or 3057NA	Buy 2057NA or 3057NA →
Trunk Light	212-2	Buy 212-2 →

Installation Guide

Open in YouTube →

Video suggestion: Installation GuideBy YouTube

Other Daytona Years

1993 1992 1988

More from Chrysler

200 300 300C 300M Aspen Cirrus Concorde Conquest

Other Vehicles That Use H4666 LED Bulbs

1997 Ford Probe 1997 GMC Jimmy 1997 GMC Sonoma 1994 Toyota Tercel 1993 Dodge Stealth 1992 Dodge Dakota