What is the low beam headlight bulb size for a 2003 Chrysler 300M?

The 2003 Chrysler 300M uses a HID-D1S LED bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 2003 Chrysler 300M?

The high beam bulb size for the 2003 Chrysler 300M is 9005XS LED.

Why are my 2003 Chrysler 300M headlights dim?

Dim headlights on a 2003 Chrysler 300M can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a HID-D1S LED LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 2003 Chrysler 300M fog light?

The 2003 Chrysler 300M uses a H3 LED bulb for the fog light position.

Is the 2003 Chrysler 300M single or dual beam?

The 2003 Chrysler 300M uses a dual bulb headlight system. This means you have separate bulbs for high and low beams.

Can I install LED bulbs on my 2003 Chrysler 300M?

Yes, the 2003 Chrysler 300M comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a HID-D1S LED LED conversion kit for the low beams.

Does the 2003 Chrysler 300M have fog lights?

Yes, the 2003 Chrysler 300M takes a H3 LED bulb for the fog light position.

Did the 2003 Chrysler 300M change headlight bulb sizes from the previous year?

No — the 2003 Chrysler 300M uses the same bulb sizes as the 2002 model. This configuration has been consistent across the 2002–2004 generation.

How do I change the headlight on a 2003 Chrysler 300M?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old HID-D1S LED bulb counter-clockwise to remove it, then insert the new bulb and reassemble. Note: Chrysler vehicles use a CANbus system, so LED replacements may need an anti-flicker decoder. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 2003 Chrysler 300M?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved HID-D1S LED LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 2003 Chrysler 300M headlights?

A pair of HID HID-D1S LED bulbs costs $50 to $150. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 2003 Chrysler 300M?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the HID-D1S LED position are available as direct plug-and-play replacements. Since the Chrysler uses CANbus monitoring, choose a CANbus-compatible LED kit to avoid dashboard errors.

The 2003 Chrysler 300M shares its bulb sizes with the 2002–2004 generation.

Fitment Guaranteed for 2003 Chrysler 300M

What Size Bulbs Does a 2003 Chrysler 300M Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$50 - $150 (HID System)

What Lighting System Does the 2003 Chrysler 300M Have?

Owners of the 2003 Chrysler 300M will find a total of 14 lighting elements throughout the vehicle's exterior. It features an extensive lighting system powered by premium factory HID/Xenon technology utilizing D1S projector housings for high-intensity output. This model belongs to the late years of the 300M's 1999-2004 production span. Note that Chrysler vehicles typically feature a CANbus electrical monitor that checks for specific bulb resistance.

LED Flicker Warning

This vehicle is known to use a CANbus system. Installing standard LEDs may cause flickering.

Use a CANbus decoder.

Can You Put LED Bulbs in a 2003 Chrysler 300M?

The 2003 Chrysler 300M is already equipped with factory D1S HID/Xenon headlights. Since HID technology already provides exceptional brightness, we recommend staying with high-quality OEM replacement bulbs rather than attempting an LED retrofit for the primary headlights. However, the H3 LED fog lights are typically halogen and are excellent candidates for an LED upgrade to match the color temperature of your HID headlights.

2003 Chrysler 300M Bulb Size Chart

Position	Bulb Size	Shop
Low Beam	HID-D1S LED	Buy HID-D1S LED →
High Beam	9005XS LED	Buy 9005XS LED →
Fog Light	H3 LED	Buy H3 LED →
Brake Light	921 LED	Buy 921 LED →
Side Marker	168 LED	Buy 168 LED →
Turn Signal Front	3157K LED	Buy 3157K LED →
Turn Signal Rear	3157K LED	Buy 3157K LED →
Dome Light	192	Buy 192 →
License Plate	168	Buy 168 →
Map Light	192	Buy 192 →
Parking Light	3157K	Buy 3157K →
Reverse Light	3157K	Buy 3157K →
Trunk Light	906	Buy 906 →
Tail Light	3157CK	Buy 3157CK →

How do the 2003 Chrysler 300M's bulbs compare to other years?

The 2003 Chrysler 300M uses the same bulbs as the 2002 model.

The 2004 model continues with the same bulb sizes.

This bulb configuration covers the 2002–2004 model years. ← 2002 2004 →

Finding the best installation guide...

Other 300M Years

2004 2002 2001 2000 1999

More from Chrysler

200 300 300C Aspen Cirrus Concorde Conquest Cordoba

Other Vehicles That Use HID-D1S LED Bulbs

2019 BMW X6 2019 Genesis G80 2019 Mercedes-Benz Benz GLS450 2019 Mercedes-Benz Benz GLS550 2019 Mercedes-Benz Benz GLS63 AMG 2019 Mercedes-Benz Benz SLC300