What is the low beam headlight bulb size for a 2012 Chrysler 200?

The 2012 Chrysler 200 uses a 9012 LED bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 2012 Chrysler 200?

The high beam bulb size for the 2012 Chrysler 200 is 9012 LED.

Why are my 2012 Chrysler 200 headlights dim?

Dim headlights on a 2012 Chrysler 200 can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a 9012 LED LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 2012 Chrysler 200 fog light?

The 2012 Chrysler 200 uses a 2504 LED bulb for the fog light position.

Is the 2012 Chrysler 200 single or dual beam?

The 2012 Chrysler 200 uses a single bulb (dual filament) headlight system. This means one bulb controls both high and low beams.

Can I install LED bulbs on my 2012 Chrysler 200?

Yes, the 2012 Chrysler 200 comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a 9012 LED LED conversion kit for the low beams.

Does the 2012 Chrysler 200 have fog lights?

Yes, the 2012 Chrysler 200 takes a 2504 LED bulb for the fog light position.

How do I change the headlight on a 2012 Chrysler 200?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old 9012 LED bulb counter-clockwise to remove it, then insert the new bulb and reassemble. Note: Chrysler vehicles use a CANbus system, so LED replacements may need an anti-flicker decoder. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 2012 Chrysler 200?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved 9012 LED LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 2012 Chrysler 200 headlights?

A pair of halogen 9012 LED bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 2012 Chrysler 200?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the 9012 LED position are available as direct plug-and-play replacements. Since the Chrysler uses CANbus monitoring, choose a CANbus-compatible LED kit to avoid dashboard errors.

This vehicle is part of the 2011–2012 Chrysler 200 generation. All models in this range share identical light bulb sizes.

Fitment Guaranteed for 2012 Chrysler 200

What Size Bulbs Does a 2012 Chrysler 200 Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 2012 Chrysler 200 Have?

When it comes to nighttime visibility, the 2012 Chrysler 200 relies on an arrangement of 13 specialized bulbs. It features an extensive lighting system powered by a halogen-based setup where a single 9012 LED dual-filament bulb handles both low and high beam duties within the same reflector. This model belongs to the early years of the 200's 2011-2017 production span. Note that Chrysler vehicles typically feature a CANbus electrical monitor that checks for specific bulb resistance.

LED Flicker Warning

This vehicle is known to use a CANbus system. Installing standard LEDs may cause flickering.

Use a CANbus decoder.

Can You Put LED Bulbs in a 2012 Chrysler 200?

Upgrading to LED is one of the most effective ways to modernize your Chrysler's appearance and safety profile. Since your 200 uses a single 9012 LED bulb for both high and low beams, ensure your chosen LED kit is "dual-beam" compatible. This allows the LED circuitry to mimic the two-filament design of the original halogen bulb. Because Chrysler utilizes a CANbus system, standard LED bulbs may cause "bulb out" errors on your dashboard. Always opt for "Error-Free" or CANbus-ready kits which include the necessary resistors. Don't forget the 2504 LED fog lights; switching these to LED can dramatically improve your visibility in adverse weather.

2012 Chrysler 200 Bulb Size Chart

Position	Bulb Size	Shop
Low Beam	9012 LED	Buy 9012 LED →
High Beam	9012 LED	Buy 9012 LED →
Fog Light	2504 LED	Buy 2504 LED →
Brake Light	LED Bulb	Buy LED Bulb →
Side Marker	LED Bulb	Buy LED Bulb →
Turn Signal Front	3157NA LED	Buy 3157NA LED →
Turn Signal Rear	LED Bulb	Buy LED Bulb →
Dome Light	578	Buy 578 →
License Plate	2825	Buy 2825 →
Map Light	212-2	Buy 212-2 →
Parking Light	LED Bulb	Buy LED Bulb →
Reverse Light	921	Buy 921 →
Trunk Light	567	Buy 567 →

Installation Guide

Open in YouTube →

Video suggestion: Installation GuideBy YouTube

Other 200 Years

2017 2016 2015 2014 2013 2011

More from Chrysler

300 300C 300M Aspen Cirrus Concorde Conquest Crossfire

Other Vehicles That Use 9012 LED Bulbs

2019 Fiat 500 2019 Fiat 500L 2019 Fiat 500X 2019 Mitsubishi Eclipse Cross 2019 Toyota C-HR 2018 Chevrolet Cruze