What is the low beam headlight bulb size for a 1996 Chevrolet Impala?

The 1996 Chevrolet Impala uses a 9004 LED bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 1996 Chevrolet Impala?

The high beam bulb size for the 1996 Chevrolet Impala is PC161.

Why are my 1996 Chevrolet Impala headlights dim?

Dim headlights on a 1996 Chevrolet Impala can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a 9004 LED LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 1996 Chevrolet Impala fog light?

The 1996 Chevrolet Impala uses a LED Fog Light bulb for the fog light position.

Is the 1996 Chevrolet Impala single or dual beam?

The 1996 Chevrolet Impala uses a dual bulb headlight system. This means you have separate bulbs for high and low beams.

Can I install LED bulbs on my 1996 Chevrolet Impala?

Yes, the 1996 Chevrolet Impala comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a 9004 LED LED conversion kit for the low beams.

Does the 1996 Chevrolet Impala have fog lights?

Yes, the 1996 Chevrolet Impala takes a LED Fog Light bulb for the fog light position.

Did the 1996 Chevrolet Impala change headlight bulb sizes from the previous year?

No — the 1996 Chevrolet Impala uses the same bulb sizes as the 1995 model. This configuration has been consistent across the 1994–1996 generation.

Is the 1996 Chevrolet Impala the first or last year to use 9004 LED bulbs?

The 1996 Chevrolet Impala is the last year in the 1994–1996 generation to use the 9004 LED bulb for the low beam headlight.

How do I change the headlight on a 1996 Chevrolet Impala?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old 9004 LED bulb counter-clockwise to remove it, then insert the new bulb and reassemble. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 1996 Chevrolet Impala?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved 9004 LED LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 1996 Chevrolet Impala headlights?

A pair of halogen 9004 LED bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 1996 Chevrolet Impala?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the 9004 LED position are available as direct plug-and-play replacements.

The 1996 Chevrolet Impala is the last model year to use this bulb configuration (1994–1996).

Fitment Guaranteed for 1996 Chevrolet Impala

What Size Bulbs Does a 1996 Chevrolet Impala Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 1996 Chevrolet Impala Have?

Owners of the 1996 Chevrolet Impala will find a total of 14 lighting elements throughout the vehicle's exterior. It features an extensive lighting system powered by a dual-bulb halogen configuration using separate 9004 LED low beam and PC161 high beam bulbs for precise light distribution. This model belongs to the mid years of the Impala's 1958-2020 production span.

Can You Put LED Bulbs in a 1996 Chevrolet Impala?

For a Chevrolet built for the road and trail, LED upgrades provide the high-contrast lighting needed for better obstacle detection. We recommend starting your upgrade with the 9004 LED low beams, as they see the most use. Adding a matching PC161 LED kit later will complete the look and ensure consistent lighting performance. Don't forget the LED Fog Light fog lights; switching these to LED can dramatically improve your visibility in adverse weather.

1996 Chevrolet Impala Bulb Size Chart

Position	Bulb Size	Shop
Low Beam	9004 LED	Buy 9004 LED →
High Beam	PC161	Buy PC161 →
Fog Light	LED Fog Light	Buy LED Fog Light →
Brake Light	PC161	Buy PC161 →
Side Marker	194 LED or 2057 LED	Buy 194 LED or 2057 LED →
Turn Signal Front	2057NA LED	Buy 2057NA LED →
Turn Signal Rear	2057 LED	Buy 2057 LED →
Reverse Light	2057	Buy 2057 →
Dome Light	561	Buy 561 →
License Plate	194	Buy 194 →
Map Light	192	Buy 192 →
Parking Light	2057NA	Buy 2057NA →
Trunk Light	920	Buy 920 →
Tail Light	194	Buy 194 →

How do the 1996 Chevrolet Impala's bulbs compare to other years?

The 1996 Chevrolet Impala uses the same bulbs as the 1995 model.

The 2000 model switched to a different bulb configuration.

This bulb configuration covers the 1994–1996 model years. ← 1995 2000 →

Finding the best installation guide...

Other Impala Years

2020 2019 2018 2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 2002 2001 2000 1995 1994 1985 1984 1983 1982 1981 1980 1979 1978 1975 1974 1973 1971 1970 1969 1968 1967 1966 1965 1964 1963 1962 1961 1960 1959 1958

More from Chevrolet

3A 3B 3C 3D 3E 3F 3G All Light Trucks

Other Vehicles That Use 9004 LED Bulbs

2003 Isuzu Rodeo Sport 2002 Dodge Ram 2500 2002 Dodge Ram 3500 2002 Isuzu Trooper 2001 Nissan Xterra 2000 Nissan Frontier