What is the low beam headlight bulb size for a 2013 BMW M6?

The 2013 BMW M6 uses a N/A bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 2013 BMW M6?

The high beam bulb size for the 2013 BMW M6 is N/A.

Why are my 2013 BMW M6 headlights dim?

Dim headlights on a 2013 BMW M6 can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a N/A LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 2013 BMW M6 fog light?

The 2013 BMW M6 typically does not come with factory fog lights in all trim levels. If your vehicle is equipped with them, check the manual as sizes can vary by trim.

Is the 2013 BMW M6 single or dual beam?

The 2013 BMW M6 uses a dual bulb headlight system. This means you have separate bulbs for high and low beams.

Can I install LED bulbs on my 2013 BMW M6?

Yes, the 2013 BMW M6 comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a N/A LED conversion kit for the low beams.

Did the 2013 BMW M6 change headlight bulb sizes from the previous year?

No — the 2013 BMW M6 uses the same bulb sizes as the 2012 model. This configuration has been consistent across the 2012–2013 generation.

Is the 2013 BMW M6 the first or last year to use N/A bulbs?

The 2013 BMW M6 is the last year in the 2012–2013 generation to use the N/A bulb for the low beam headlight.

How do I change the headlight on a 2013 BMW M6?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old N/A bulb counter-clockwise to remove it, then insert the new bulb and reassemble. Note: BMW vehicles use a CANbus system, so LED replacements may need an anti-flicker decoder. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 2013 BMW M6?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved N/A LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 2013 BMW M6 headlights?

A pair of halogen N/A bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 2013 BMW M6?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the N/A position are available as direct plug-and-play replacements. Since the BMW uses CANbus monitoring, choose a CANbus-compatible LED kit to avoid dashboard errors.

The 2013 BMW M6 is the last model year to use this bulb configuration (2012–2013).

Fitment Guaranteed for 2013 BMW M6

What Size Bulbs Does a 2013 BMW M6 Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Hard (Tight clearances)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 2013 BMW M6 Have?

When it comes to nighttime visibility, the 2013 BMW M6 relies on an arrangement of 2 specialized bulbs. It features a standard lighting system powered by a dual-bulb halogen configuration using separate low beam and high beam bulbs for precise light distribution. This model belongs to the late years of the M6's 1987-2018 production span. Note that BMW vehicles typically feature a CANbus electrical monitor that checks for specific bulb resistance.

LED Flicker Warning

This vehicle is known to use a CANbus system. Installing standard LEDs may cause flickering.

Use a CANbus decoder.

Can You Put LED Bulbs in a 2013 BMW M6?

Upgrading to LED is one of the most effective ways to modernize your BMW's appearance and safety profile. We recommend starting your upgrade with the low beams, as they see the most use. Adding a matching LED kit later will complete the look and ensure consistent lighting performance. Because BMW utilizes a CANbus system, standard LED bulbs may cause "bulb out" errors on your dashboard. Always opt for "Error-Free" or CANbus-ready kits which include the necessary resistors.

2013 BMW M6 Bulb Size Chart

Position	Bulb Size	Shop
Reverse Light	921	Buy 921 →
Door Light	W5W	Buy W5W →

How do the 2013 BMW M6's bulbs compare to other years?

The 2013 BMW M6 uses the same bulbs as the 2012 model.

The 2014 model switched to a different bulb configuration.

This bulb configuration covers the 2012–2013 model years. ← 2012 2014 →

Finding the best installation guide...

Other M6 Years

2018 2017 2016 2015 2014 2012 2010 2009 2008 2007 2006 1988 1987