What is the low beam headlight bulb size for a 1989 BMW K1?

The 1989 BMW K1 uses a H4 bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 1989 BMW K1?

The high beam bulb size for the 1989 BMW K1 is N/A.

Why are my 1989 BMW K1 headlights dim?

Dim headlights on a 1989 BMW K1 can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a H4 LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 1989 BMW K1 fog light?

The 1989 BMW K1 typically does not come with factory fog lights in all trim levels. If your vehicle is equipped with them, check the manual as sizes can vary by trim.

Is the 1989 BMW K1 single or dual beam?

The 1989 BMW K1 uses a dual bulb headlight system. This means you have separate bulbs for high and low beams.

Can I install LED bulbs on my 1989 BMW K1?

Yes, the 1989 BMW K1 comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a H4 LED conversion kit for the low beams.

Did the 1989 BMW K1 change headlight bulb sizes from the previous year?

No — the 1989 BMW K1 uses the same bulb sizes as the 1988 model. This configuration has been consistent across the 1988–1993 generation.

How do I change the headlight on a 1989 BMW K1?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old H4 bulb counter-clockwise to remove it, then insert the new bulb and reassemble. Note: BMW vehicles use a CANbus system, so LED replacements may need an anti-flicker decoder. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 1989 BMW K1?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved H4 LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 1989 BMW K1 headlights?

A pair of halogen H4 bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 1989 BMW K1?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the H4 position are available as direct plug-and-play replacements. Since the BMW uses CANbus monitoring, choose a CANbus-compatible LED kit to avoid dashboard errors.

The 1989 BMW K1 shares its bulb sizes with the 1988–1993 generation.

Fitment Guaranteed for 1989 BMW K1

What Size Bulbs Does a 1989 BMW K1 Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Hard (Tight clearances)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 1989 BMW K1 Have?

Owners of the 1989 BMW K1 will find a total of 2 lighting elements throughout the vehicle's exterior. It features a standard lighting system powered by a dual-bulb halogen configuration using separate H4 low beam and high beam bulbs for precise light distribution. This model belongs to the early years of the K1's 1988-1993 production span. Note that BMW vehicles typically feature a CANbus electrical monitor that checks for specific bulb resistance.

LED Flicker Warning

This vehicle is known to use a CANbus system. Installing standard LEDs may cause flickering.

Use a CANbus decoder.

Can You Put LED Bulbs in a 1989 BMW K1?

Upgrading to LED is one of the most effective ways to modernize your BMW's appearance and safety profile. We recommend starting your upgrade with the H4 low beams, as they see the most use. Adding a matching LED kit later will complete the look and ensure consistent lighting performance. Because BMW utilizes a CANbus system, standard LED bulbs may cause "bulb out" errors on your dashboard. Always opt for "Error-Free" or CANbus-ready kits which include the necessary resistors.

1989 BMW K1 Bulb Size Chart

Position	Bulb Size	Shop
Low Beam	H4	Buy H4 →
Parking Light	3893	Buy 3893 →

How do the 1989 BMW K1's bulbs compare to other years?

The 1989 BMW K1 uses the same bulbs as the 1988 model.

The 1990 model continues with the same bulb sizes.

This bulb configuration covers the 1988–1993 model years. ← 1988 1990 →

Finding the best installation guide...

Other K1 Years

1993 1991 1990 1988

Other Vehicles That Use H4 Bulbs

2022 Hyundai Accent 2020 Ford Figo 2020 MINI Cooper 2020 MINI Cooper Clubman 2020 Mitsubishi Mirage 2020 Nissan March

H4 Comparisons

9003 vs H4 H4 vs H7 H4 vs HB2