What is the low beam headlight bulb size for a 2011 BMW Alpina B7?

The 2011 BMW Alpina B7 uses a N/A bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 2011 BMW Alpina B7?

The high beam bulb size for the 2011 BMW Alpina B7 is N/A.

Why are my 2011 BMW Alpina B7 headlights dim?

Dim headlights on a 2011 BMW Alpina B7 can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a N/A LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 2011 BMW Alpina B7 fog light?

The 2011 BMW Alpina B7 uses a H8 bulb for the fog light position.

Is the 2011 BMW Alpina B7 single or dual beam?

The 2011 BMW Alpina B7 uses a dual bulb headlight system. This means you have separate bulbs for high and low beams.

Can I install LED bulbs on my 2011 BMW Alpina B7?

Yes, the 2011 BMW Alpina B7 comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a N/A LED conversion kit for the low beams.

Does the 2011 BMW Alpina B7 have fog lights?

Yes, the 2011 BMW Alpina B7 takes a H8 bulb for the fog light position.

Did the 2011 BMW Alpina B7 change headlight bulb sizes from the previous year?

Yes — the 2011 BMW Alpina B7 uses different bulb sizes than the 2008 model. The 2011–2012 generation introduced this bulb configuration.

Is the 2011 BMW Alpina B7 the first or last year to use N/A bulbs?

The 2011 BMW Alpina B7 is the first year in the 2011–2012 generation to use the N/A bulb for the low beam headlight.

How do I change the headlight on a 2011 BMW Alpina B7?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old N/A bulb counter-clockwise to remove it, then insert the new bulb and reassemble. Note: BMW vehicles use a CANbus system, so LED replacements may need an anti-flicker decoder. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 2011 BMW Alpina B7?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved N/A LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 2011 BMW Alpina B7 headlights?

A pair of halogen N/A bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 2011 BMW Alpina B7?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the N/A position are available as direct plug-and-play replacements. Since the BMW uses CANbus monitoring, choose a CANbus-compatible LED kit to avoid dashboard errors.

The 2011 BMW Alpina B7 is the first model year to use this bulb configuration (2011–2012).

Fitment Guaranteed for 2011 BMW Alpina B7

What Size Bulbs Does a 2011 BMW Alpina B7 Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Hard (Tight clearances)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 2011 BMW Alpina B7 Have?

Lighting on the 2011 BMW Alpina B7 is managed by a total of 3 bulbs, covering everything from primary headlights to signal indicators. It features a standard lighting system powered by a dual-bulb halogen configuration using separate low beam and high beam bulbs for precise light distribution. Note that BMW vehicles typically feature a CANbus electrical monitor that checks for specific bulb resistance.

LED Flicker Warning

This vehicle is known to use a CANbus system. Installing standard LEDs may cause flickering.

Use a CANbus decoder.

Can You Put LED Bulbs in a 2011 BMW Alpina B7?

Upgrading to LED is one of the most effective ways to modernize your BMW's appearance and safety profile. We recommend starting your upgrade with the low beams, as they see the most use. Adding a matching LED kit later will complete the look and ensure consistent lighting performance. Because BMW utilizes a CANbus system, standard LED bulbs may cause "bulb out" errors on your dashboard. Always opt for "Error-Free" or CANbus-ready kits which include the necessary resistors. Don't forget the H8 fog lights; switching these to LED can dramatically improve your visibility in adverse weather.

2011 BMW Alpina B7 Bulb Size Chart

Position	Bulb Size	Shop
Daytime Running	H8	Buy H8 →
Fog Light	H8	Buy H8 →
Reverse Light	921	Buy 921 →

How do the 2011 BMW Alpina B7's bulbs compare to other years?

The 2011 BMW Alpina B7 changed bulb sizes from 2008. The previous model year used a different configuration.

The 2012 model continues with the same bulb sizes.

This bulb configuration covers the 2011–2012 model years. ← 2008 2012 →

Finding the best installation guide...

Other Alpina B7 Years

2015 2014 2013 2012 2008 2007