What is the low beam headlight bulb size for a 2000 BMW 528i?

The 2000 BMW 528i uses a HID-D2S LED bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 2000 BMW 528i?

The high beam bulb size for the 2000 BMW 528i is 9005 LED.

Why are my 2000 BMW 528i headlights dim?

Dim headlights on a 2000 BMW 528i can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a HID-D2S LED LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 2000 BMW 528i fog light?

The 2000 BMW 528i uses a H7 LED bulb for the fog light position.

Is the 2000 BMW 528i single or dual beam?

The 2000 BMW 528i uses a dual bulb headlight system. This means you have separate bulbs for high and low beams.

Can I install LED bulbs on my 2000 BMW 528i?

Yes, the 2000 BMW 528i comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a HID-D2S LED LED conversion kit for the low beams.

Does the 2000 BMW 528i have fog lights?

Yes, the 2000 BMW 528i takes a H7 LED bulb for the fog light position.

Did the 2000 BMW 528i change headlight bulb sizes from the previous year?

No — the 2000 BMW 528i uses the same bulb sizes as the 1999 model. This configuration has been consistent across the 1997–2000 generation.

Is the 2000 BMW 528i the first or last year to use HID-D2S LED bulbs?

The 2000 BMW 528i is the last year in the 1997–2000 generation to use the HID-D2S LED bulb for the low beam headlight.

How do I change the headlight on a 2000 BMW 528i?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old HID-D2S LED bulb counter-clockwise to remove it, then insert the new bulb and reassemble. Note: BMW vehicles use a CANbus system, so LED replacements may need an anti-flicker decoder. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 2000 BMW 528i?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved HID-D2S LED LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 2000 BMW 528i headlights?

A pair of HID HID-D2S LED bulbs costs $50 to $150. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 2000 BMW 528i?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the HID-D2S LED position are available as direct plug-and-play replacements. Since the BMW uses CANbus monitoring, choose a CANbus-compatible LED kit to avoid dashboard errors.

The 2000 BMW 528i is the last model year to use this bulb configuration (1997–2000).

Fitment Guaranteed for 2000 BMW 528i

What Size Bulbs Does a 2000 BMW 528i Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Hard (Tight clearances)

Est. Replacement Cost

$50 - $150 (HID System)

What Lighting System Does the 2000 BMW 528i Have?

Lighting on the 2000 BMW 528i is managed by a total of 12 bulbs, covering everything from primary headlights to signal indicators. It features an extensive lighting system powered by premium factory HID/Xenon technology utilizing D2S projector housings for high-intensity output. This model belongs to the mid years of the 528i's 1979-2016 production span. Note that BMW vehicles typically feature a CANbus electrical monitor that checks for specific bulb resistance.

LED Flicker Warning

This vehicle is known to use a CANbus system. Installing standard LEDs may cause flickering.

Use a CANbus decoder.

Can You Put LED Bulbs in a 2000 BMW 528i?

The 2000 BMW 528i is already equipped with factory D2S HID/Xenon headlights. Since HID technology already provides exceptional brightness, we recommend staying with high-quality OEM replacement bulbs rather than attempting an LED retrofit for the primary headlights. However, the H7 LED fog lights are typically halogen and are excellent candidates for an LED upgrade to match the color temperature of your HID headlights.

2000 BMW 528i Bulb Size Chart

Position	Bulb Size	Shop
Low Beam	HID-D2S LED	Buy HID-D2S LED →
High Beam	9005 LED	Buy 9005 LED →
Fog Light	H7 LED	Buy H7 LED →
Brake Light	7506 LED	Buy 7506 LED →
Side Marker	5007 LED	Buy 5007 LED →
Turn Signal Front	2825 LED	Buy 2825 LED →
Turn Signal Rear	7506 LED	Buy 7506 LED →
Dome Light	6411	Buy 6411 →
License Plate	6418	Buy 6418 →
Parking Light	3157K	Buy 3157K →
Reverse Light	7506	Buy 7506 →
Trunk Light	6411	Buy 6411 →

How do the 2000 BMW 528i's bulbs compare to other years?

The 2000 BMW 528i uses the same bulbs as the 1999 model.

The 2008 model switched to a different bulb configuration.

This bulb configuration covers the 1997–2000 model years. ← 1999 2008 →

Finding the best installation guide...

Other 528i Years

2016 2015 2014 2013 2012 2011 2010 2009 2008 1999 1998 1997 1981 1980 1979

Other Vehicles That Use HID-D2S LED Bulbs

2019 Infiniti QX60 2019 Mitsubishi Outlander Sport 2019 Mitsubishi RVR 2019 Nissan 370Z 2018 Honda Odyssey 2017 Infiniti QX50