What is the low beam headlight bulb size for a 1978 BMW 320i?

The 1978 BMW 320i uses a H5006 bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 1978 BMW 320i?

The high beam bulb size for the 1978 BMW 320i is H5001.

Why are my 1978 BMW 320i headlights dim?

Dim headlights on a 1978 BMW 320i can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a H5006 LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 1978 BMW 320i fog light?

The 1978 BMW 320i typically does not come with factory fog lights in all trim levels. If your vehicle is equipped with them, check the manual as sizes can vary by trim.

Is the 1978 BMW 320i single or dual beam?

The 1978 BMW 320i uses a dual bulb headlight system. This means you have separate bulbs for high and low beams.

Can I install LED bulbs on my 1978 BMW 320i?

Yes, the 1978 BMW 320i comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a H5006 LED conversion kit for the low beams.

Did the 1978 BMW 320i change headlight bulb sizes from the previous year?

Yes — the 1978 BMW 320i uses different bulb sizes than the 1977 model. The 1978 generation introduced this bulb configuration.

Is the 1978 BMW 320i the first or last year to use H5006 bulbs?

The 1978 BMW 320i is the only year in the 1978 generation to use the H5006 bulb for the low beam headlight.

How do I change the headlight on a 1978 BMW 320i?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old H5006 bulb counter-clockwise to remove it, then insert the new bulb and reassemble. Note: BMW vehicles use a CANbus system, so LED replacements may need an anti-flicker decoder. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 1978 BMW 320i?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved H5006 LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 1978 BMW 320i headlights?

A pair of halogen H5006 bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 1978 BMW 320i?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the H5006 position are available as direct plug-and-play replacements. Since the BMW uses CANbus monitoring, choose a CANbus-compatible LED kit to avoid dashboard errors.

The 1978 BMW 320i has a unique bulb configuration not shared with adjacent model years.

Fitment Guaranteed for 1978 BMW 320i

What Size Bulbs Does a 1978 BMW 320i Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Hard (Tight clearances)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 1978 BMW 320i Have?

When it comes to nighttime visibility, the 1978 BMW 320i relies on an arrangement of 5 specialized bulbs. It features a standard lighting system powered by a dual-bulb halogen configuration using separate H5006 low beam and H5001 high beam bulbs for precise light distribution. This model belongs to the early years of the 320i's 1977-2018 production span. Note that BMW vehicles typically feature a CANbus electrical monitor that checks for specific bulb resistance.

LED Flicker Warning

This vehicle is known to use a CANbus system. Installing standard LEDs may cause flickering.

Use a CANbus decoder.

Can You Put LED Bulbs in a 1978 BMW 320i?

Upgrading to LED is one of the most effective ways to modernize your BMW's appearance and safety profile. We recommend starting your upgrade with the H5006 low beams, as they see the most use. Adding a matching H5001 LED kit later will complete the look and ensure consistent lighting performance. Because BMW utilizes a CANbus system, standard LED bulbs may cause "bulb out" errors on your dashboard. Always opt for "Error-Free" or CANbus-ready kits which include the necessary resistors.

1978 BMW 320i Bulb Size Chart

Position	Bulb Size	Shop
Side Marker	3893	Buy 3893 →
Turn Signal Front	7528	Buy 7528 →
High Beam	H5001	Buy H5001 →
Low Beam	H5006	Buy H5006 →
Parking Light	7528	Buy 7528 →

How do the 1978 BMW 320i's bulbs compare to other years?

The 1978 BMW 320i changed bulb sizes from 1977. The previous model year used a different configuration.

The 1979 model switched to a different bulb configuration.

This bulb configuration covers the 1978 model years. ← 1977 1979 →

Finding the best installation guide...

Other 320i Years

2018 2017 2016 2015 2014 2013 2012 2006 2005 2004 2003 2002 2001 1995 1994 1993 1992 1983 1982 1981 1980 1979 1977

Other Vehicles That Use H5006 Bulbs

1991 Isuzu Impulse 1989 Jaguar Vanden Plas 1989 Jaguar XJ12 1989 Jaguar XJ6 1989 Jaguar XJS 1988 Ferrari Testarossa