What is the low beam headlight bulb size for a 2011 BMW 3 Series 2-dr.?

The 2011 BMW 3 Series 2-dr. uses a N/A bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 2011 BMW 3 Series 2-dr.?

The high beam bulb size for the 2011 BMW 3 Series 2-dr. is N/A.

Why are my 2011 BMW 3 Series 2-dr. headlights dim?

Dim headlights on a 2011 BMW 3 Series 2-dr. can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a N/A LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 2011 BMW 3 Series 2-dr. fog light?

The 2011 BMW 3 Series 2-dr. uses a H8 bulb for the fog light position.

Is the 2011 BMW 3 Series 2-dr. single or dual beam?

The 2011 BMW 3 Series 2-dr. uses a dual bulb headlight system. This means you have separate bulbs for high and low beams.

Can I install LED bulbs on my 2011 BMW 3 Series 2-dr.?

Yes, the 2011 BMW 3 Series 2-dr. comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a N/A LED conversion kit for the low beams.

Does the 2011 BMW 3 Series 2-dr. have fog lights?

Yes, the 2011 BMW 3 Series 2-dr. takes a H8 bulb for the fog light position.

Did the 2011 BMW 3 Series 2-dr. change headlight bulb sizes from the previous year?

Yes — the 2011 BMW 3 Series 2-dr. uses different bulb sizes than the 2010 model. The 2011–2013 generation introduced this bulb configuration.

Is the 2011 BMW 3 Series 2-dr. the first or last year to use N/A bulbs?

The 2011 BMW 3 Series 2-dr. is the first year in the 2011–2013 generation to use the N/A bulb for the low beam headlight.

How do I change the headlight on a 2011 BMW 3 Series 2-dr.?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old N/A bulb counter-clockwise to remove it, then insert the new bulb and reassemble. Note: BMW vehicles use a CANbus system, so LED replacements may need an anti-flicker decoder. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 2011 BMW 3 Series 2-dr.?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved N/A LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 2011 BMW 3 Series 2-dr. headlights?

A pair of halogen N/A bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 2011 BMW 3 Series 2-dr.?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the N/A position are available as direct plug-and-play replacements. Since the BMW uses CANbus monitoring, choose a CANbus-compatible LED kit to avoid dashboard errors.

The 2011 BMW 3 Series 2-dr. is the first model year to use this bulb configuration (2011–2013).

Fitment Guaranteed for 2011 BMW 3 Series 2-dr.

What Size Bulbs Does a 2011 BMW 3 Series 2-dr. Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Hard (Tight clearances)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 2011 BMW 3 Series 2-dr. Have?

Owners of the 2011 BMW 3 Series 2-dr. will find a total of 3 lighting elements throughout the vehicle's exterior. It features a standard lighting system powered by a dual-bulb halogen configuration using separate low beam and high beam bulbs for precise light distribution. Note that BMW vehicles typically feature a CANbus electrical monitor that checks for specific bulb resistance.

LED Flicker Warning

This vehicle is known to use a CANbus system. Installing standard LEDs may cause flickering.

Use a CANbus decoder.

Can You Put LED Bulbs in a 2011 BMW 3 Series 2-dr.?

Upgrading to LED is one of the most effective ways to modernize your BMW's appearance and safety profile. We recommend starting your upgrade with the low beams, as they see the most use. Adding a matching LED kit later will complete the look and ensure consistent lighting performance. Because BMW utilizes a CANbus system, standard LED bulbs may cause "bulb out" errors on your dashboard. Always opt for "Error-Free" or CANbus-ready kits which include the necessary resistors. Don't forget the H8 fog lights; switching these to LED can dramatically improve your visibility in adverse weather.

2011 BMW 3 Series 2-dr. Bulb Size Chart

Position	Bulb Size	Shop
Daytime Running	H8	Buy H8 →
Fog Light	H8	Buy H8 →
Reverse Light	921	Buy 921 →

How do the 2011 BMW 3 Series 2-dr.'s bulbs compare to other years?

The 2011 BMW 3 Series 2-dr. changed bulb sizes from 2010. The previous model year used a different configuration.

The 2012 model continues with the same bulb sizes.

This bulb configuration covers the 2011–2013 model years. ← 2010 2012 →

Finding the best installation guide...

Other 3 Series 2-dr. Years

2013 2012 2010 2009 2008 2007