What is the low beam headlight bulb size for a 1968 BMW 2002?

The 1968 BMW 2002 uses a H6024 bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 1968 BMW 2002?

The high beam bulb size for the 1968 BMW 2002 is N/A.

Why are my 1968 BMW 2002 headlights dim?

Dim headlights on a 1968 BMW 2002 can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a H6024 LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 1968 BMW 2002 fog light?

The 1968 BMW 2002 typically does not come with factory fog lights in all trim levels. If your vehicle is equipped with them, check the manual as sizes can vary by trim.

Is the 1968 BMW 2002 single or dual beam?

The 1968 BMW 2002 uses a dual bulb headlight system. This means you have separate bulbs for high and low beams.

Can I install LED bulbs on my 1968 BMW 2002?

Yes, the 1968 BMW 2002 comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a H6024 LED conversion kit for the low beams.

Did the 1968 BMW 2002 change headlight bulb sizes from the previous year?

Yes — the 1968 BMW 2002 uses different bulb sizes than the 1967 model. The 1968 generation introduced this bulb configuration.

Is the 1968 BMW 2002 the first or last year to use H6024 bulbs?

The 1968 BMW 2002 is the only year in the 1968 generation to use the H6024 bulb for the low beam headlight.

How do I change the headlight on a 1968 BMW 2002?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old H6024 bulb counter-clockwise to remove it, then insert the new bulb and reassemble. Note: BMW vehicles use a CANbus system, so LED replacements may need an anti-flicker decoder. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 1968 BMW 2002?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved H6024 LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 1968 BMW 2002 headlights?

A pair of halogen H6024 bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 1968 BMW 2002?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the H6024 position are available as direct plug-and-play replacements. Since the BMW uses CANbus monitoring, choose a CANbus-compatible LED kit to avoid dashboard errors.

The 1968 BMW 2002 has a unique bulb configuration not shared with adjacent model years.

Fitment Guaranteed for 1968 BMW 2002

What Size Bulbs Does a 1968 BMW 2002 Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Hard (Tight clearances)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 1968 BMW 2002 Have?

The 1968 BMW 2002 utilizes a refined lighting configuration featuring 5 distinct bulb positions. It features a standard lighting system powered by a dual-bulb halogen configuration using separate H6024 low beam and high beam bulbs for precise light distribution. This model belongs to the early years of the 2002's 1966-1976 production span. Note that BMW vehicles typically feature a CANbus electrical monitor that checks for specific bulb resistance.

LED Flicker Warning

This vehicle is known to use a CANbus system. Installing standard LEDs may cause flickering.

Use a CANbus decoder.

Can You Put LED Bulbs in a 1968 BMW 2002?

Upgrading to LED is one of the most effective ways to modernize your BMW's appearance and safety profile. We recommend starting your upgrade with the H6024 low beams, as they see the most use. Adding a matching LED kit later will complete the look and ensure consistent lighting performance. Because BMW utilizes a CANbus system, standard LED bulbs may cause "bulb out" errors on your dashboard. Always opt for "Error-Free" or CANbus-ready kits which include the necessary resistors.

1968 BMW 2002 Bulb Size Chart

Position	Bulb Size	Shop
Low Beam	H6024	Buy H6024 →
Turn Signal Front	7528	Buy 7528 →
Side Marker	3893	Buy 3893 →
License Plate	DE3021	Buy DE3021 →
Parking Light	7528	Buy 7528 →

How do the 1968 BMW 2002's bulbs compare to other years?

The 1968 BMW 2002 changed bulb sizes from 1967. The previous model year used a different configuration.

The 1969 model switched to a different bulb configuration.

This bulb configuration covers the 1968 model years. ← 1967 1969 →

Finding the best installation guide...

Other 2002 Years

1976 1975 1974 1973 1972 1971 1970 1969 1967 1966

Other Vehicles That Use H6024 Bulbs

2006 Hummer H1 1998 Bentley Turbo R 1997 Mazda Miata 1996 Mazda MX-5 Miata 1995 Land Rover Range Rover 1991 Mitsubishi Montero