What is the low beam headlight bulb size for a 2007 Audi S8?

The 2007 Audi S8 uses a N/A bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 2007 Audi S8?

The high beam bulb size for the 2007 Audi S8 is H7.

Why are my 2007 Audi S8 headlights dim?

Dim headlights on a 2007 Audi S8 can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a N/A LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 2007 Audi S8 fog light?

The 2007 Audi S8 uses a H7 bulb for the fog light position.

Is the 2007 Audi S8 single or dual beam?

The 2007 Audi S8 uses a dual bulb headlight system. This means you have separate bulbs for high and low beams.

Can I install LED bulbs on my 2007 Audi S8?

Yes, the 2007 Audi S8 comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a N/A LED conversion kit for the low beams.

Does the 2007 Audi S8 have fog lights?

Yes, the 2007 Audi S8 takes a H7 bulb for the fog light position.

Did the 2007 Audi S8 change headlight bulb sizes from the previous year?

Yes — the 2007 Audi S8 uses different bulb sizes than the 2003 model. The 2007 generation introduced this bulb configuration.

Is the 2007 Audi S8 the first or last year to use N/A bulbs?

The 2007 Audi S8 is the only year in the 2007 generation to use the N/A bulb for the low beam headlight.

How do I change the headlight on a 2007 Audi S8?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old N/A bulb counter-clockwise to remove it, then insert the new bulb and reassemble. Note: Audi vehicles use a CANbus system, so LED replacements may need an anti-flicker decoder. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 2007 Audi S8?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved N/A LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 2007 Audi S8 headlights?

A pair of halogen N/A bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 2007 Audi S8?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the N/A position are available as direct plug-and-play replacements. Since the Audi uses CANbus monitoring, choose a CANbus-compatible LED kit to avoid dashboard errors.

The 2007 Audi S8 has a unique bulb configuration not shared with adjacent model years.

Fitment Guaranteed for 2007 Audi S8

What Size Bulbs Does a 2007 Audi S8 Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Hard (Tight clearances)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 2007 Audi S8 Have?

Owners of the 2007 Audi S8 will find a total of 6 lighting elements throughout the vehicle's exterior. It features a standard lighting system powered by a dual-bulb halogen configuration using separate low beam and H7 high beam bulbs for precise light distribution. This model belongs to the mid years of the S8's 2001-2018 production span. Note that Audi vehicles typically feature a CANbus electrical monitor that checks for specific bulb resistance.

LED Flicker Warning

This vehicle is known to use a CANbus system. Installing standard LEDs may cause flickering.

Use a CANbus decoder.

Can You Put LED Bulbs in a 2007 Audi S8?

Upgrading to LED is one of the most effective ways to modernize your Audi's appearance and safety profile. We recommend starting your upgrade with the low beams, as they see the most use. Adding a matching H7 LED kit later will complete the look and ensure consistent lighting performance. Because Audi utilizes a CANbus system, standard LED bulbs may cause "bulb out" errors on your dashboard. Always opt for "Error-Free" or CANbus-ready kits which include the necessary resistors. Don't forget the H7 fog lights; switching these to LED can dramatically improve your visibility in adverse weather.

2007 Audi S8 Bulb Size Chart

Position	Bulb Size	Shop
Fog Light	H7	Buy H7 →
High Beam	H7	Buy H7 →
Reverse Light	921	Buy 921 →
Parking Light	W5W	Buy W5W →
Door Light	W5W	Buy W5W →
Trunk Light	W5W	Buy W5W →

How do the 2007 Audi S8's bulbs compare to other years?

The 2007 Audi S8 changed bulb sizes from 2003. The previous model year used a different configuration.

The 2008 model switched to a different bulb configuration.

This bulb configuration covers the 2007 model years. ← 2003 2008 →

Finding the best installation guide...

Other S8 Years

2018 2017 2016 2015 2014 2013 2009 2008 2003 2002 2001