What is the low beam headlight bulb size for a 2010 Audi S4?

The 2010 Audi S4 uses a HID-D3S LED bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 2010 Audi S4?

The high beam bulb size for the 2010 Audi S4 is HID-D3S LED.

Why are my 2010 Audi S4 headlights dim?

Dim headlights on a 2010 Audi S4 can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a HID-D3S LED LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 2010 Audi S4 fog light?

The 2010 Audi S4 uses a H11 LED bulb for the fog light position.

Is the 2010 Audi S4 single or dual beam?

The 2010 Audi S4 uses a single bulb (dual filament) headlight system. This means one bulb controls both high and low beams.

Can I install LED bulbs on my 2010 Audi S4?

Yes, the 2010 Audi S4 comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a HID-D3S LED LED conversion kit for the low beams.

Does the 2010 Audi S4 have fog lights?

Yes, the 2010 Audi S4 takes a H11 LED bulb for the fog light position.

Did the 2010 Audi S4 change headlight bulb sizes from the previous year?

No — the 2010 Audi S4 uses the same bulb sizes as the 2009 model. This configuration has been consistent across the 2009–2012 generation.

How do I change the headlight on a 2010 Audi S4?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old HID-D3S LED bulb counter-clockwise to remove it, then insert the new bulb and reassemble. Note: Audi vehicles use a CANbus system, so LED replacements may need an anti-flicker decoder. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 2010 Audi S4?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved HID-D3S LED LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 2010 Audi S4 headlights?

A pair of HID HID-D3S LED bulbs costs $50 to $150. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 2010 Audi S4?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the HID-D3S LED position are available as direct plug-and-play replacements. Since the Audi uses CANbus monitoring, choose a CANbus-compatible LED kit to avoid dashboard errors.

The 2010 Audi S4 shares its bulb sizes with the 2009–2012 generation.

Fitment Guaranteed for 2010 Audi S4

What Size Bulbs Does a 2010 Audi S4 Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Hard (Tight clearances)

Est. Replacement Cost

$50 - $150 (HID System)

What Lighting System Does the 2010 Audi S4 Have?

When it comes to nighttime visibility, the 2010 Audi S4 relies on an arrangement of 12 specialized bulbs. It features an extensive lighting system powered by premium factory HID/Xenon technology utilizing D3S projector housings for high-intensity output. This model belongs to the mid years of the S4's 1992-2020 production span. Note that Audi vehicles typically feature a CANbus electrical monitor that checks for specific bulb resistance.

LED Flicker Warning

This vehicle is known to use a CANbus system. Installing standard LEDs may cause flickering.

Use a CANbus decoder.

Can You Put LED Bulbs in a 2010 Audi S4?

The 2010 Audi S4 is already equipped with factory D3S HID/Xenon headlights. Since HID technology already provides exceptional brightness, we recommend staying with high-quality OEM replacement bulbs rather than attempting an LED retrofit for the primary headlights. However, the H11 LED fog lights are typically halogen and are excellent candidates for an LED upgrade to match the color temperature of your HID headlights.

2010 Audi S4 Bulb Size Chart

Position	Bulb Size	Shop
Low Beam	HID-D3S LED	Buy HID-D3S LED →
High Beam	HID-D3S LED	Buy HID-D3S LED →
Fog Light	H11 LED	Buy H11 LED →
Brake Light	LED Bulb	Buy LED Bulb →
Side Marker	2825 LED	Buy 2825 LED →
Turn Signal Front	12272 LED	Buy 12272 LED →
Turn Signal Rear	7506 LED	Buy 7506 LED →
License Plate	6418	Buy 6418 →
Map Light	2825	Buy 2825 →
Parking Light	N/A	Buy N/A →
Reverse Light	921	Buy 921 →
Trunk Light	2825	Buy 2825 →
Door Light	W5W	Buy W5W →

How do the 2010 Audi S4's bulbs compare to other years?

The 2010 Audi S4 uses the same bulbs as the 2009 model.

The 2011 model continues with the same bulb sizes.

This bulb configuration covers the 2009–2012 model years. ← 2009 2011 →

Finding the best installation guide...

Other S4 Years

2020 2019 2018 2016 2015 2014 2013 2012 2011 2009 2008 2007 2006 2005 2004 2002 2001 2000 1994 1993 1992

Other Vehicles That Use HID-D3S LED Bulbs

2023 Chevrolet Camaro 2022 Dodge Charger 2022 Dodge Durango 2022 Hyundai Ioniq 2022 Kia Sportage 2021 Dodge Challenger