What is the low beam headlight bulb size for a 2016 Audi RS7?

The 2016 Audi RS7 uses a LED Headlights bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 2016 Audi RS7?

The high beam bulb size for the 2016 Audi RS7 is LED Headlights.

Why are my 2016 Audi RS7 headlights dim?

Dim headlights on a 2016 Audi RS7 can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a LED Headlights LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 2016 Audi RS7 fog light?

The 2016 Audi RS7 uses a LED Fog Light bulb for the fog light position.

Is the 2016 Audi RS7 single or dual beam?

The 2016 Audi RS7 uses a single bulb (dual filament) headlight system. This means one bulb controls both high and low beams.

Can I install LED bulbs on my 2016 Audi RS7?

Yes, the 2016 Audi RS7 comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a LED Headlights LED conversion kit for the low beams.

Does the 2016 Audi RS7 have fog lights?

Yes, the 2016 Audi RS7 takes a LED Fog Light bulb for the fog light position.

Did the 2016 Audi RS7 change headlight bulb sizes from the previous year?

Yes — the 2016 Audi RS7 uses different bulb sizes than the 2015 model. The 2016–2018 generation introduced this bulb configuration.

How do I change the headlight on a 2016 Audi RS7?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old LED Headlights bulb counter-clockwise to remove it, then insert the new bulb and reassemble. Note: Audi vehicles use a CANbus system, so LED replacements may need an anti-flicker decoder. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 2016 Audi RS7?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved LED Headlights LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 2016 Audi RS7 headlights?

A pair of halogen LED Headlights bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 2016 Audi RS7?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the LED Headlights position are available as direct plug-and-play replacements. Since the Audi uses CANbus monitoring, choose a CANbus-compatible LED kit to avoid dashboard errors.

The 2016 Audi RS7 is the first model year to use this bulb configuration (2016–2018).

Fitment Guaranteed for 2016 Audi RS7

What Size Bulbs Does a 2016 Audi RS7 Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Hard (Tight clearances)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 2016 Audi RS7 Have?

The 2016 Audi RS7 utilizes a refined lighting configuration featuring 13 distinct bulb positions. It features an extensive lighting system powered by factory-integrated LED technology, which offers superior longevity and a modern cool-white appearance compared to traditional bulbs. This model belongs to the mid years of the RS7's 2014-2018 production span. Note that Audi vehicles typically feature a CANbus electrical monitor that checks for specific bulb resistance.

LED Flicker Warning

This vehicle is known to use a CANbus system. Installing standard LEDs may cause flickering.

Use a CANbus decoder.

Can You Put LED Bulbs in a 2016 Audi RS7?

Upgrading to LED is one of the most effective ways to modernize your Audi's appearance and safety profile. Since your RS7 uses a single LED Headlights bulb for both high and low beams, ensure your chosen LED kit is "dual-beam" compatible. This allows the LED circuitry to mimic the two-filament design of the original halogen bulb. Because Audi utilizes a CANbus system, standard LED bulbs may cause "bulb out" errors on your dashboard. Always opt for "Error-Free" or CANbus-ready kits which include the necessary resistors. Don't forget the LED Fog Light fog lights; switching these to LED can dramatically improve your visibility in adverse weather.

2016 Audi RS7 Bulb Size Chart

Position	Bulb Size	Shop
Low Beam	LED Headlights	Buy LED Headlights →
High Beam	LED Headlights	Buy LED Headlights →
Fog Light	LED Fog Light	Buy LED Fog Light →
Brake Light	LED Bulb	Buy LED Bulb →
Dome Light	LED Bulb	Buy LED Bulb →
Side Marker	LED Bulb	Buy LED Bulb →
Turn Signal Front	LED Light	Buy LED Light →
License Plate	LED Bulb	Buy LED Bulb →
Map Light	LED Bulb	Buy LED Bulb →
Parking Light	N/A	Buy N/A →
Turn Signal Rear	LED Bulb	Buy LED Bulb →
Reverse Light	LED Bulb	Buy LED Bulb →
Trunk Light	LED Bulb	Buy LED Bulb →
Door Light	W5W	Buy W5W →

How do the 2016 Audi RS7's bulbs compare to other years?

The 2016 Audi RS7 changed bulb sizes from 2015. The previous model year used a different configuration.

The 2017 model continues with the same bulb sizes.

This bulb configuration covers the 2016–2018 model years. ← 2015 2017 →

Finding the best installation guide...

Other RS7 Years

2018 2017 2015 2014