Skip to main content
Fitment Guaranteed for 1990 Mazda RX7

What Size Bulbs Does a 1990 Mazda RX7 Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 1990 Mazda RX7 Have?

The 1990 Mazda RX7 features an extensive lighting system with 13 bulb positions. It uses halogen technology with H6054 LED low beams and 158 high beams in a dual-bulb configuration. The RX7 has been available from 1979 to 1995, and the 1990 model falls in the mid-generation years.

Can You Put LED Bulbs in a 1990 Mazda RX7?

To upgrade the 1990 Mazda RX7 headlights to LED, you will need a H6054 LED LED kit for the low beams and a 158 LED kit for the high beams. Start with the low beams since they are used most often and have the biggest impact on nighttime visibility. For the fog lights, a H3 LED LED bulb provides a clean white output that pairs well with LED headlights.

How to Replace Bulbs on a 1990 Mazda RX7

To remove the headlight bulb, disconnect the wiring harness, then twist the bulb counter-clockwise and pull it straight out of the housing. Older model years like the 1990 RX7 typically offer easy access to the headlight bulbs from behind the headlight assembly under the hood. Most owners can complete the swap in under 10 minutes per side. When installing the new bulb, avoid touching the glass with bare fingers. Skin oils create hot spots that shorten bulb life. Wear clean gloves or handle the bulb by its plastic base only. The fog lights are accessed from underneath the front bumper. You may need to remove a few plastic clips or screws from the fender liner to reach the H3 LED fog light socket.

Full Upgrade Bundle

Upgrade All 13 Positions at Once

Low Beam: H6054 LEDHigh Beam: 158Fog Light: H3 LEDBrake Light: 1156 LEDSide Marker: 194 LEDTurn Signal Front: 1157 LEDTurn Signal Rear: 1156 LEDDome Light: 168 or DE3175License Plate: 168 or 89Map Light: 168Parking Light: 1157Reverse Light: 1156Trunk Light: DE3022
Shop Complete LED Kit

Want to upgrade everything at once?

Shop Complete LED Kit for 1990 Mazda RX7
Installation Guide
Open in YouTube →

How Long Do 1990 Mazda RX7 Headlight Bulbs Last?

Standard halogen headlights on the 1990 Mazda RX7 have an expected lifespan of 500 to 1,000 hours, which works out to roughly 2 to 3 years of normal use. Signs of a failing halogen bulb include noticeably dimmer output, a yellowish tint compared to the other headlight, or intermittent flickering. At 36 years old, the original bulbs on your RX7 are likely overdue for replacement. Even if they still illuminate, reduced brightness significantly impacts nighttime safety. When one headlight burns out, replace both sides at the same time. Bulbs from the same batch age at similar rates, and mismatched brightness is distracting to oncoming drivers.

What Bulbs Are Compatible with the 1990 Mazda RX7?

The H6054 low beam bulb on the 1990 Mazda RX7 is a specific fitment. There are no widely recognized cross-compatible alternatives, so make sure to purchase the exact H6054 size. Using the wrong bulb size can cause improper beam patterns that reduce your visibility and blind other drivers. It can also cause overheating inside the headlight housing, potentially warping the plastic lens or reflector. Always verify the bulb number before purchasing.

1990 Mazda RX7 Headlight FAQ

The 1990 Mazda RX7 uses a H6054 LED bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

The high beam bulb size for the 1990 Mazda RX7 is 158.

The 1990 Mazda RX7 uses a dual bulb headlight system. This means you have separate bulbs for high and low beams.

Yes, the 1990 Mazda RX7 comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a H6054 LED LED conversion kit for the low beams.

Yes, the 1990 Mazda RX7 takes a H3 LED bulb for the fog light position.

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old H6054 LED bulb counter-clockwise to remove it, then insert the new bulb and reassemble. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved H6054 LED LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

A pair of halogen H6054 LED bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the H6054 LED position are available as direct plug-and-play replacements.

Did Mazda RX7 Bulb Sizes Change Over the Years?

Over its production run from 1979 to 1995, the Mazda RX7 has seen bulb size changes in the Low Beam, High Beam and Fog Light positions. The 1990 model uses the earlier bulb specification that was in place before the change around 1993. Always verify the exact bulb size for your specific 1990 model year using the chart above, as using the wrong size can result in poor fitment or reduced light output.

Other RX7 Years

Other Vehicles That Use H6054 LED Bulbs

These vehicles from other makes also use a H6054 LED low beam bulb: