Skip to main content
Fitment Guaranteed for 1991 Mazda 626

What Size Bulbs Does a 1991 Mazda 626 Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 1991 Mazda 626 Have?

The 1991 Mazda 626 features an extensive lighting system with 12 bulb positions. It uses halogen technology with 9004 LED low beams and 194 high beams in a dual-bulb configuration. The 626 has been available from 1980 to 2002, and the 1991 model falls in the mid-generation years.

Can You Put LED Bulbs in a 1991 Mazda 626?

To upgrade the 1991 Mazda 626 headlights to LED, you will need a 9004 LED LED kit for the low beams and a 194 LED kit for the high beams. Start with the low beams since they are used most often and have the biggest impact on nighttime visibility. For the fog lights, a H3 LED LED bulb provides a clean white output that pairs well with LED headlights.

How to Replace Bulbs on a 1991 Mazda 626

To remove the headlight bulb, disconnect the wiring harness, then twist the bulb counter-clockwise and pull it straight out of the housing. Older model years like the 1991 626 typically offer easy access to the headlight bulbs from behind the headlight assembly under the hood. Most owners can complete the swap in under 10 minutes per side. When installing the new bulb, avoid touching the glass with bare fingers. Skin oils create hot spots that shorten bulb life. Wear clean gloves or handle the bulb by its plastic base only. The fog lights are accessed from underneath the front bumper. You may need to remove a few plastic clips or screws from the fender liner to reach the H3 LED fog light socket.

Full Upgrade Bundle

Upgrade All 12 Positions at Once

Low Beam: 9004 LEDHigh Beam: 194Fog Light: H3 LEDBrake Light: 74Side Marker: 168 LEDTurn Signal Front: 1156 LED or 1157NA LEDTurn Signal Rear: 1156 LEDDome Light: DE3175License Plate: 168Parking Light: 67Reverse Light: 1156Trunk Light: 168 or DE3022
Shop Complete LED Kit

Want to upgrade everything at once?

Shop Complete LED Kit for 1991 Mazda 626
Installation Guide
Open in YouTube →

How Long Do 1991 Mazda 626 Headlight Bulbs Last?

Standard halogen headlights on the 1991 Mazda 626 have an expected lifespan of 500 to 1,000 hours, which works out to roughly 2 to 3 years of normal use. Signs of a failing halogen bulb include noticeably dimmer output, a yellowish tint compared to the other headlight, or intermittent flickering. At 35 years old, the original bulbs on your 626 are likely overdue for replacement. Even if they still illuminate, reduced brightness significantly impacts nighttime safety. When one headlight burns out, replace both sides at the same time. Bulbs from the same batch age at similar rates, and mismatched brightness is distracting to oncoming drivers.

What Bulbs Are Compatible with the 1991 Mazda 626?

The 9004 low beam bulb on the 1991 Mazda 626 is a specific fitment. There are no widely recognized cross-compatible alternatives, so make sure to purchase the exact 9004 size. Using the wrong bulb size can cause improper beam patterns that reduce your visibility and blind other drivers. It can also cause overheating inside the headlight housing, potentially warping the plastic lens or reflector. Always verify the bulb number before purchasing.

1991 Mazda 626 Headlight FAQ

The 1991 Mazda 626 uses a 9004 LED bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

The high beam bulb size for the 1991 Mazda 626 is 194.

The 1991 Mazda 626 uses a dual bulb headlight system. This means you have separate bulbs for high and low beams.

Yes, the 1991 Mazda 626 comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a 9004 LED LED conversion kit for the low beams.

Yes, the 1991 Mazda 626 takes a H3 LED bulb for the fog light position.

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old 9004 LED bulb counter-clockwise to remove it, then insert the new bulb and reassemble. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved 9004 LED LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

A pair of halogen 9004 LED bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the 9004 LED position are available as direct plug-and-play replacements.

Did Mazda 626 Bulb Sizes Change Over the Years?

Over its production run from 1980 to 2002, the Mazda 626 has seen bulb size changes in the Low Beam, High Beam and Fog Light positions. The 1991 model uses the earlier bulb specification that was in place before the change around 2000. Always verify the exact bulb size for your specific 1991 model year using the chart above, as using the wrong size can result in poor fitment or reduced light output.

Other 626 Years

Other Vehicles That Use 9004 LED Bulbs

These vehicles from other makes also use a 9004 LED low beam bulb: