Skip to main content
Fitment Guaranteed for 2000 Plymouth Prowler

What Size Bulbs Does a 2000 Plymouth Prowler Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 2000 Plymouth Prowler Have?

The 2000 Plymouth Prowler features an extensive lighting system with 12 bulb positions. It uses halogen technology with 9005 LED low beams and PC121 high beams in a dual-bulb configuration. The Prowler has been available from 1999 to 2001, and the 2000 model falls in the mid-generation years.

Can You Put LED Bulbs in a 2000 Plymouth Prowler?

To upgrade the 2000 Plymouth Prowler headlights to LED, you will need a 9005 LED LED kit for the low beams and a PC121 LED kit for the high beams. Start with the low beams since they are used most often and have the biggest impact on nighttime visibility. For the fog lights, a LED Fog Light LED bulb provides a clean white output that pairs well with LED headlights.

How to Replace Bulbs on a 2000 Plymouth Prowler

The 9005 bulb uses a push-and-twist L-shaped bayonet lock. To remove the old bulb, disconnect the wiring harness first, then twist the bulb counter-clockwise and pull it out. Older model years like the 2000 Prowler typically offer easy access to the headlight bulbs from behind the headlight assembly under the hood. Most owners can complete the swap in under 10 minutes per side. When installing the new bulb, avoid touching the glass with bare fingers. Skin oils create hot spots that shorten bulb life. Wear clean gloves or handle the bulb by its plastic base only. The fog lights are accessed from underneath the front bumper. You may need to remove a few plastic clips or screws from the fender liner to reach the LED Fog Light fog light socket.

Full Upgrade Bundle

Upgrade All 12 Positions at Once

Low Beam: 9005 LEDHigh Beam: PC121Fog Light: LED Fog LightBrake Light: PC121Side Marker: 168 LEDTurn Signal Front: 3157NA LEDTurn Signal Rear: 3157 LEDReverse Light: 3157License Plate: 194Map Light: 212-2Parking Light: 3157NATrunk Light: 912
Shop Complete LED Kit

2000 Plymouth Prowler Complete Bulb Size Chart

Installation Guide
Open in YouTube →

How Long Do 2000 Plymouth Prowler Headlight Bulbs Last?

Standard halogen headlights on the 2000 Plymouth Prowler have an expected lifespan of 500 to 1,000 hours, which works out to roughly 2 to 3 years of normal use. Signs of a failing halogen bulb include noticeably dimmer output, a yellowish tint compared to the other headlight, or intermittent flickering. At 26 years old, the original bulbs on your Prowler are likely overdue for replacement. Even if they still illuminate, reduced brightness significantly impacts nighttime safety. When one headlight burns out, replace both sides at the same time. Bulbs from the same batch age at similar rates, and mismatched brightness is distracting to oncoming drivers.

What Bulbs Are Compatible with the 2000 Plymouth Prowler?

The 9005 low beam bulb on the 2000 Plymouth Prowler is cross-compatible with HB3 bulbs. These share the same physical base and electrical connection, so they will fit the socket. However, 9005 is the recommended size because it is optimized for the wattage and beam pattern designed into your headlight housing. Using the wrong bulb size can cause improper beam patterns that reduce your visibility and blind other drivers. It can also cause overheating inside the headlight housing, potentially warping the plastic lens or reflector. Always verify the bulb number before purchasing.

2000 Plymouth Prowler Headlight FAQ

The 2000 Plymouth Prowler uses a 9005 LED bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

The high beam bulb size for the 2000 Plymouth Prowler is PC121.

The 2000 Plymouth Prowler uses a dual bulb headlight system. This means you have separate bulbs for high and low beams.

Yes, the 2000 Plymouth Prowler comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a 9005 LED LED conversion kit for the low beams.

Yes, the 2000 Plymouth Prowler takes a LED Fog Light bulb for the fog light position.

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old 9005 LED bulb counter-clockwise to remove it, then insert the new bulb and reassemble. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved 9005 LED LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

A pair of halogen 9005 LED bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the 9005 LED position are available as direct plug-and-play replacements.

Did Plymouth Prowler Bulb Sizes Change Over the Years?

The Plymouth Prowler has maintained consistent bulb sizes across all model years from 1999 to 2001. The low beam has used a 9005 LED bulb throughout, which means replacement parts and LED upgrade kits are widely available and well-tested for this model. If you find a deal on bulbs for any Prowler year in this range, they will fit your 2000 model.

Other Prowler Years

Other Vehicles That Use 9005 LED Bulbs

These vehicles from other makes also use a 9005 LED low beam bulb: