Skip to main content
Fitment Guaranteed for 2011 Kia Rondo

What Size Bulbs Does a 2011 Kia Rondo Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 2011 Kia Rondo Have?

The 2011 Kia Rondo features an extensive lighting system with 13 bulb positions. It uses halogen technology with H11B LED low beams and H1 LED high beams in a dual-bulb configuration. The Rondo has been available from 2007 to 2012, and the 2011 model falls in the late-generation years.

Can You Put LED Bulbs in a 2011 Kia Rondo?

To upgrade the 2011 Kia Rondo headlights to LED, you will need a H11B LED LED kit for the low beams and a H1 LED LED kit for the high beams. Start with the low beams since they are used most often and have the biggest impact on nighttime visibility. For the fog lights, a 881 LED LED bulb provides a clean white output that pairs well with LED headlights.

How to Replace Bulbs on a 2011 Kia Rondo

To remove the headlight bulb, disconnect the wiring harness, then twist the bulb counter-clockwise and pull it straight out of the housing. Older model years like the 2011 Rondo typically offer easy access to the headlight bulbs from behind the headlight assembly under the hood. Most owners can complete the swap in under 10 minutes per side. When installing the new bulb, avoid touching the glass with bare fingers. Skin oils create hot spots that shorten bulb life. Wear clean gloves or handle the bulb by its plastic base only. The fog lights are accessed from underneath the front bumper. You may need to remove a few plastic clips or screws from the fender liner to reach the 881 LED fog light socket.

Full Upgrade Bundle

Upgrade All 13 Positions at Once

Low Beam: H11B LEDHigh Beam: H1 LEDFog Light: 881 LEDBrake Light: LED BulbSide Marker: 168 LEDTurn Signal Front: 2357NA LEDTurn Signal Rear: 1156NA LEDReverse Light: 921Dome Light: DE3175License Plate: 6418Map Light: 175Parking Light: 2357NATrunk Light: 6418
Shop Complete LED Kit

Want to upgrade everything at once?

Shop Complete LED Kit for 2011 Kia Rondo
Installation Guide
Open in YouTube →

How Long Do 2011 Kia Rondo Headlight Bulbs Last?

Standard halogen headlights on the 2011 Kia Rondo have an expected lifespan of 500 to 1,000 hours, which works out to roughly 2 to 3 years of normal use. Signs of a failing halogen bulb include noticeably dimmer output, a yellowish tint compared to the other headlight, or intermittent flickering. At 15 years old, the original bulbs on your Rondo are likely overdue for replacement. Even if they still illuminate, reduced brightness significantly impacts nighttime safety. When one headlight burns out, replace both sides at the same time. Bulbs from the same batch age at similar rates, and mismatched brightness is distracting to oncoming drivers.

What Bulbs Are Compatible with the 2011 Kia Rondo?

The H11B low beam bulb on the 2011 Kia Rondo is a specific fitment. There are no widely recognized cross-compatible alternatives, so make sure to purchase the exact H11B size. Using the wrong bulb size can cause improper beam patterns that reduce your visibility and blind other drivers. It can also cause overheating inside the headlight housing, potentially warping the plastic lens or reflector. Always verify the bulb number before purchasing.

2011 Kia Rondo Headlight FAQ

The 2011 Kia Rondo uses a H11B LED bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

The high beam bulb size for the 2011 Kia Rondo is H1 LED.

The 2011 Kia Rondo uses a dual bulb headlight system. This means you have separate bulbs for high and low beams.

Yes, the 2011 Kia Rondo comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a H11B LED LED conversion kit for the low beams.

Yes, the 2011 Kia Rondo takes a 881 LED bulb for the fog light position.

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old H11B LED bulb counter-clockwise to remove it, then insert the new bulb and reassemble. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved H11B LED LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

A pair of halogen H11B LED bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the H11B LED position are available as direct plug-and-play replacements.

Did Kia Rondo Bulb Sizes Change Over the Years?

The Kia Rondo has maintained consistent bulb sizes across all model years from 2007 to 2012. The low beam has used a H11B LED bulb throughout, which means replacement parts and LED upgrade kits are widely available and well-tested for this model. If you find a deal on bulbs for any Rondo year in this range, they will fit your 2011 model.

Other Rondo Years

Other Vehicles That Use H11B LED Bulbs

These vehicles from other makes also use a H11B LED low beam bulb: