What Size Bulbs Does a 1995 Chrysler Concorde Use?
Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.
Installation Difficulty
Easy (Plug and Play)
Est. Replacement Cost
$15 - $40 (Halogen) / $30+ (LED)
What Lighting System Does the 1995 Chrysler Concorde Have?
The 1995 Chrysler Concorde features an extensive lighting system with 13 bulb positions. It uses halogen technology with 9007 LED low beams and PC194 high beams in a dual-bulb configuration. The Concorde has been available from 1993 to 2004, and the 1995 model falls in the early-generation years. As a Chrysler vehicle, it uses a CANbus electrical system that monitors bulb status.
LED Flicker Warning
This vehicle (Chrysler) is known to use a CANbus system that checks for burnt-out bulbs. Installing standard LEDs may cause them to flicker or trigger a dashboard error.
We highly recommend using a CANbus decoder or "Anti-Flicker" resistors.
Can You Put LED Bulbs in a 1995 Chrysler Concorde?
To upgrade the 1995 Chrysler Concorde headlights to LED, you will need a 9007 LED LED kit for the low beams and a PC194 LED kit for the high beams. Start with the low beams since they are used most often and have the biggest impact on nighttime visibility. Important: Chrysler vehicles use a CANbus system that detects bulb wattage. Standard LED bulbs may trigger dashboard warnings or flicker. Choose LED kits labeled "CANbus-compatible" or add inline decoder resistors to prevent these issues. For the fog lights, a H3 LED LED bulb provides a clean white output that pairs well with LED headlights.
How to Replace Bulbs on a 1995 Chrysler Concorde
The 9007 bulb uses a twist-lock base with a keyed tab for alignment identical to H13. To remove the old bulb, disconnect the wiring harness first, then twist the bulb counter-clockwise and pull it out. Older model years like the 1995 Concorde typically offer easy access to the headlight bulbs from behind the headlight assembly under the hood. Most owners can complete the swap in under 10 minutes per side. When installing the new bulb, avoid touching the glass with bare fingers. Skin oils create hot spots that shorten bulb life. Wear clean gloves or handle the bulb by its plastic base only. The fog lights are accessed from underneath the front bumper. You may need to remove a few plastic clips or screws from the fender liner to reach the H3 LED fog light socket.
Full Upgrade Bundle
Upgrade All 13 Positions at Once
1995 Chrysler Concorde Complete Bulb Size Chart
| Position | Bulb Size | Shop |
|---|---|---|
Low Beam | 9007 LED | Buy 9007 LED |
High Beam | PC194 | Buy PC194 |
Fog Light | H3 LED | Buy H3 LED |
Brake Light | 74 | Buy 74 |
Side Marker | 3057 LED | Buy 3057 LED |
Turn Signal Front | 3157NA LED | Buy 3157NA LED |
Turn Signal Rear | 3057 LED | Buy 3057 LED |
Reverse Light | 921 | Buy 921 |
Dome Light | 192 | Buy 192 |
License Plate | 168 | Buy 168 |
Map Light | 192 | Buy 192 |
Parking Light | 3157NA | Buy 3157NA |
Trunk Light | 98 | Buy 98 |
Want to upgrade everything at once?
Shop Complete LED Kit for 1995 Chrysler ConcordeHow Long Do 1995 Chrysler Concorde Headlight Bulbs Last?
Standard halogen headlights on the 1995 Chrysler Concorde have an expected lifespan of 500 to 1,000 hours, which works out to roughly 2 to 3 years of normal use. Signs of a failing halogen bulb include noticeably dimmer output, a yellowish tint compared to the other headlight, or intermittent flickering. At 31 years old, the original bulbs on your Concorde are likely overdue for replacement. Even if they still illuminate, reduced brightness significantly impacts nighttime safety. When one headlight burns out, replace both sides at the same time. Bulbs from the same batch age at similar rates, and mismatched brightness is distracting to oncoming drivers.
What Bulbs Are Compatible with the 1995 Chrysler Concorde?
The 9007 low beam bulb on the 1995 Chrysler Concorde is cross-compatible with HB5 bulbs. These share the same physical base and electrical connection, so they will fit the socket. However, 9007 is the recommended size because it is optimized for the wattage and beam pattern designed into your headlight housing. The 9007 is a dual-filament bulb, meaning one bulb contains two separate filaments for low and high beams. This is a different design from single-filament bulbs like H11 or 9005. Make sure any LED replacement is specifically designed for dual-filament operation. Using the wrong bulb size can cause improper beam patterns that reduce your visibility and blind other drivers. It can also cause overheating inside the headlight housing, potentially warping the plastic lens or reflector. Always verify the bulb number before purchasing.
1995 Chrysler Concorde Headlight FAQ
Did Chrysler Concorde Bulb Sizes Change Over the Years?
Over its production run from 1993 to 2004, the Chrysler Concorde has seen bulb size changes in the Low Beam, High Beam and Fog Light positions. The 1995 model uses the earlier bulb specification that was in place before the change around 2002. Always verify the exact bulb size for your specific 1995 model year using the chart above, as using the wrong size can result in poor fitment or reduced light output.
Other Concorde Years
More from Chrysler
Other Vehicles That Use 9007 LED Bulbs
These vehicles from other makes also use a 9007 LED low beam bulb: